Musicrown – DF1208MN


More details

Similar Products

sonifex-avn-aio4
  • Sonifex

Sonifex – AVN-AIO4

AVN-AIO4 is a multi-channel Dante® Audio interface, which provides 4 balanced analogue inputs and outputs to and from the Dante network.  AVN-AIO4 is a multi-channel Dante® Audio interface, which provides 4 balanced analogue inputs and outputs to and from the Dante network. Simple to configure and operate, these cost effective rack-mount solutions offer an easy solution for AV professionals and system integrators. Packaged in a 1U form factor, they use Neutrik XLR connectors, are Dante® AES67 compliant and use PoE for power.
    I/O Interfaces
  • Dante Ch: 4x4
  • 16-bit, 24-bit, 32-bit
ru-nl2_400px|ru-nl2_400px
  • RDL

RDL – RU-NL2

The RU-NL2 is a high quality Dante network to line level interface. The RU-NL2 converts two Dante network audio channels to +4 dBu balanced line level that corresponds to a network digital audio level of -18 dBFS. LED audio signal indicators are provided. Model RU- NL2P operates from PoE. The RU-NL2 is a high quality Dante network to line level interface. The RU-NL2 converts two Dante network audio channels to +4 dBu balanced professional line level. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels. Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. Crosstalk is below the noise floor between the outputs across the entire audio spectrum. The RU-NL2 is also available in a PoE version (RU-NL2P). If PoE power and an external 24 Vdc supply are both feeding an RU-NL2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
auvitran-AV-WALL-DT4i
  • Auvitran

Auvitran – AV-WALL-DT4i

The AV-WALL-DT4i Dante Mic/Line Interface is a cost-effective wall box in an incredible small size of less than 45x45mm, designed to fit into a single-gang junction box (European format). It offers 2 XLR Mic inputs with 64dB gain and a line-in stereo mini Jack with 40dB gain. Gain can be controlled remotely (network) or locally (rotary button). The AV-WALL-DT4i Dante Mic/Line Interface is a cost-effective wall box in an incredible small size of less than 45x45mm. The AV-WALL-DT4i offers 64dB of true preamp gain on 2 professional XLR Mic inputs and 40dB of gain at line level on a stereo mini Jack connector. Gain can be controlled remotely via network or locally via direct rotary push button. Internal connector allows for link with optional Bluetooth extension Wall-Plate. The AV-WALL-DT4i is designed to fit into a single-gang junction box of only 45x45mm fitting small European format. AV-WALL-DT4i is PoE enabled and thus power, control and audio data connectivity is provided by a single CAT‐5e/6 cable. The size of the main box is 44.6 x 44.6 x 50 mm. It is compatible with “Mosaic” plate of Legrand®. The depth can be adjusted between 26 to 43 mm to fit near any wall depths. Wall plate size may vary depending of the region.
    I/O Interfaces
  • Dante Ch: 4 Out
  • 24-bit, 32-bit