Musicrown – DF4.4MN


More details

Similar Products

ssl-x-light-bridge
  • Solid State Logic

SSL – X-Light Bridge

For the touring market, a new 1U X-Light Bridge interface designed to be deployed within stage I/O racks, features a fully redundant pair of X-Light connections using Neutrik opticalCON Quad format connectors on the front panel.  For the touring market, a new 1U X-Light Bridge interface designed to be deployed within stage I/O racks, features a fully redundant pair of X-Light connections using Neutrik opticalCON Quad format connectors on the front panel. On the rear panel there are two redundant pairs of Neutrik etherCON format Dante connections for audio and control distribution. Up to eight SB 32.24 stageboxes can now be connected via a pair of network switches to a single X-Light Bridge redundantly at 96 kHz with gain control of each input. There are no big workflow changes either! X-Light Bridge provides a seamless I/O boost for the user, as the routing process in the console interface is exactly the same via the X-Light Bridge as it is via the existing local Dante Expander Module. This includes the ability to configure the X-Light channel capacity as Virtual Tie Lines, for routing in Dante Controller, or as Dual Domain Routes for seamless routing and control from console channels.
    I/O Interfaces
  • Dante Ch: 256x256
  • 24-bit
cadac-mc-dante-network-bridge_600px
  • Cadac

Cadac – CDC MC Dante Network Bridge

The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs. The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs. The MC Dante also has on-board sample rate conversion for all 128 channels, as well as its own independent word clock with audio connections via co-axial. Dual PSUs come as standard to ensure secure performance in critical network applications. As with the CDC MC MADI unit, the co-axial ports glow either red or blue for Rx (receive) or Tx (transmit) – enabling fast and accurate configuring of the MegaCOMMS network especially in low light.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
monacor-international-dtra-2
  • Monacor

Monacor – DTRA-2

The DTRA-2 is a Dante I/O box, for converting Dante streams into analogue audio signals.  The DTRA-2 is a Dante I/O box, for converting Dante streams into analogue audio signals. 
  • 1 x Dante™ input (EtherCon/RJ45)
  • 1 x aux input (3.5 mm stereo jack)
  • 2 x audio output (XLR, bal.)
  • 1 x monitor output (3.5 mm stereo jack) 
  • Output adjustable via recessed potentiometer (0-15 dBu)
  • Individually switchable noise generator for the outputs
  • Encoding/decoding: 16/24/32 bits
  • Sample rates: 48/88.2/96 kHz
  • LED indication for level control, PoE, external power supply and link
  • Metal housing
  • Power is provided via PoE or optional power supply
  • Dimensions: 81 x 45 x 153 mm
  • Weight: 400 g
    I/O Interfaces