Cart
← Back to Product Catalog

NTP Technology – PENTA 720

I/O Interfaces

More details

Similar Products

Dante官网logo
  • BARE

BARE – BR-1011DM

Features： 1. Equipped with 5 groups of RJ45 loopback signal acquisition interface, "ring hand in hand" connection, the system is more reliable 2. Conventional network cable (Cat5e or Cat6) connection between each unit is convenient and quick 3. Each group of lines can connect 30 units, a single machine can connect 150 units, and an expander can be added to connect more units 4. Support WiFi for all control functions of the central processor 5. Support Dante network transmission, and additionally support three-way LINE/MIC input Dante network, which can be set through software 6. Remote control and remote assistance can be carried out through the TCP/IP network interface 7. Support meeting function: discussion 8. Support system hot swap 9. Support RS232 central control control, and have two-way code sending function, realize seamless connection with intelligent central control system 10. Support external audio input and recording output port 11. Support access port for conference call 12. The system can be set to lock or release the function of the microphone operation, and each unit has an electronic volume adjustment function. 13. Multiple speaking modes: first in first out, last in first out, automatic mode, discussion mode, chairman mode 14. With voice control to turn on the microphone function and speech time limit function (optional 1-999 seconds) 15. Connect to the computer to simulate the scene layout of the on-site meeting, and you can click to turn on or off all the unit microphones at any time 16. The host adopts LCD operation interface (3.5 inches), which can switch various national languages and display perpetual calendar
    I/O Interfaces
  • Dante Ch: 4x4
See the product
AVN-DIO19
  • Sonifex

AVN-DIO19

The AVN-DIO19 audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. All outputs follow the Dante system sample rate.
    I/O Interfaces
  • Dante Ch: 16x16
  • 16-bit, 24-bit, 32-bit
See the product
rdl-dd-bn22_1200px_0|rdl-dd-bn22_1200px_0
  • RDL

RDL – DD-BN22

The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DD-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level on front-panel XLR jacks. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN22 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN22’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces
See the product