Cart
← Back to Product Catalog

PC406-D

Amplifiers

Similar Products

CS168D
  • LEA Professional

CS168D

The CONNECTSERIES 168D is an 8-channel amplifier with 160 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 168D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable. Then there’s the Cloud…DANTE CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud The DANTE CONNECTSERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.
    Amplifiers
See the product
  • Biamp

Voltera – D-1200-4

4-channel amplified loudspeaker controller, 1200 watts total power. Key Features
  • Audio DSP and amplified loudspeaker controller plus some headroom for Tesira custom processing and hosting of expanders
  • 4 class D channels sharing 1200 watts
  • Power sharing provides up to 75% of total or 900 W power through any single channel
  • High peak voltage output capability: 145 Vpk
  • Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
  • Each model supports AVB, Dante, and AES67
  • Accurate raised cosine EQ below 160 Hz
  • Group-controlled raised cosine EQ making it attractive for tuning large systems
  • Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
  • Processor can be sustained through POE – no main power required and no reboots
  • Support for failover-to-analog from networked audio input operation
  • 5-year warranty
  • Compliant with the US Trade Agreement Act (TAA)
  • Biamp Workplace Ready
    Amplifiers
  • Dante Ch: 32x32
  • 48kHz-96kHz
See the product
ashly-nXp-8002_600px
  • Ashly Audio

Ashly – nXp8002d

The nXp8002d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 16x16
  • 24-bit
See the product