Powersoft - Quattrocanali 1204

Powersoft – Quattrocanali 1204

Product Information

Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products.

Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products. The patented SRM (Smart Rails Management) technology allows to maximize the the efficiency of the system.

With Output Powers ranging form 300W to 1200W per channel, in depth control and monitoring capabilities, Quattrocanali is designed to be conveniently tailored to all small to medium sized installation project.

Specifications

Dante Input Channels: 4
Bit Depth: 24-bit
Sample Rate: 48kHz
AES67 Enabled

Seikaku – AVS-960EX

1. The max power can reach 360W and output via 6 zone.
2. Three-way MIC/LINE input with phantom power and one BGM input
3. Six-way controllable 24V power supply output controls.
4. Backup power DC24 input connector.
5. Build in 16M flash. For store alarm audio message or normal audio message.
6. Automatically alarm audio message or normal audio message broadcast is available via GPIO control input.
7. Two-way emergency control input and six normal control input.
9. DANTE network interface.
10. Automatically fault detected: speaker Line/ Control input connection / device local fault etc.
11. Relevant functions are compliant with Chinese fire regulations.

Amplifiers

See the product

Klangwert

KLANGWERT – i60D PoE+ amp

KLANGWERT PoE+ 2-channel amplifier with DSP.

The KLANGWERT PoE+ amplifier includes a Class D amplifier. Thanks to the use of a high efficiently power supply this amplifier is rated with 2x30 Watts RMS / 60 Watts peak (using a POE+ switch) into two channels. Inputs and outputs can be configured in different ways.

The internal powerful DSP board gives access to gain, delay, 10-Bd EQ with IIR filter and 24 internal presets.

The DSP is controlled by the PANC software in an IP network. All active AIMLINE and KLANGWERT digital systems can be controlled using just one software. Made in Germany

24V Power supply optionally available

Dimensions: 85 x 150 x 26mm (excl.connectors)

Amplifiers

See the product

Stewart Audio

Stewart Audio – CVA50-1 NET+

Mono Networked Subcompact Amplifier - 50W x 1 @ 70V/100V Mono constant voltage networked amplifier in a subcompact, 1/3 rack form factor. Includes both local and network inputs with priority switching.

Dante and local inputs
Priority switching between signals
Remote volume control and muting
External inline power supply

Amplifiers

See the product

Powersoft – Quattrocanali 1204

Product Information

Specifications

Similar Products

Seikaku – AVS-960EX

KLANGWERT – i60D PoE+ amp

Stewart Audio – CVA50-1 NET+

Stay connected to Dante

Support

Company

Dante Networking Alliance