Cart
← Back to Product Catalog

Pragma – BTone Dante

I/O Interfaces

More Info

Similar Products

amphenol-amphe-dante-RJD1112-0500_600px|amphenol-amphe-dante-RJD1112-0500_600px
  • Amphenol

Amphenol – Amphe-Dante RJD1112-0050

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and one AX series XLR analogue outputs in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and one AX series XLR analogue outputs in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.
    I/O Interfaces
  • 24-bit
  • 44.1kHz-96kHz
See the product
aeq-netbox-4mh
  • AEQ

AEQ – NetBOX 4 MH

The NETBOX 4MH interface has been designed to cover the need for high quality microphone inputs and headphone outputs availability outputs, for example in radio and TV studios, stage or multimedia installations. The multichannel IP connectivity (Audinate DANTE™ protocol) makes the Inputs of the unit available at any point of the network. The NETBOX 4MH interface has been designed to cover the need for high quality microphone inputs and headphone outputs availability outputs, for example in radio and TV studios, stage or multimedia installations. The multichannel IP connectivity (Audinate DANTE™ protocol) makes the Inputs of the unit available at any point of the network. NETBOX 4MH interface also includes 4 General Purpose inputs and outputs (GPIO) as interfaces for signaling transport between the different devices in the IP network. As a complementary feature, the unit is soporting the same inputs and outputs as analogue balanced line Inputs and Outputs. Further, the new interface has additional GPIOs that can be used in for example a studio installation and as an interface to signaling terminals such as the AEQ SRC 03. This greatly facilitates the implementation of services such as remote CUE and Cough-cut, User keys, ON AIR and READY lights, etc. Technical specifications
  • Channels: 4 microphone-line input, 4 line outputs, in parallel with 4 stereo headphone outputs. Mute and gain control between +12 and -30 dB, individually or in stereo pairs.
  • 48V Phantom Power supply and electronic balancing for all microphone inputs.
  • Data format: DANTE Audio-over-IP technology.
  • Scalable and flexible network topology supporting a wide range of audio transmitters and receivers.
  • Supports 100Mbps, 1 Gbps and 10 Gbps network segments.
  • 2 x RJ45, 100 BASE-T Ethernet ports with galvanic isolation, usable as “daisy chain” connections.
    I/O Interfaces
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 0.16LR

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.16MR provides 16 balanced outputs. the output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

    I/O Interfaces
  • Dante Ch: 16 In
  • 16-bit, 24-bit, 32-bit
See the product