Cart
← Back to Product Catalog

promedias – proDT XO UP

I/O Interfaces

More details

Similar Products

1569527185_1507920
  • Muxlab

Muxlab – HDMI/Dante over IP PoE Transmitter

The HDMI/Dante over IP PoE Transmitter, UHD-4K allows HDMI video equipment supporting up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0), plus Dante audio equipment to be connected and extended to create an independently distributed audio and video network.  The HDMI/Dante over IP PoE Transmitter, UHD-4K allows HDMI video equipment supporting up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0), plus Dante audio equipment to be connected and extended to create an independently distributed audio and video network. 100’s of Single Displays and Video Wall Displays of user configurable size (X by Y) may be supported, depending on network bandwidth. Audio can be independently distributed to 100’s of Dante supported audio devices. Supports HDR at up to 4K @ 30Hz (4:2:2). The unit can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch, and supports PoE (PD) when powered by a PoE (PSE) Ethernet Switch. An IR Emitter or IR Sensor, if required, may be purchased separately for IR based remote control applications.
    I/O Interfaces
See the product
Eagles-40-Front|3747b9cd277a44bd8eedafb0157ddf2c
  • Tendzone

Tendzone – Eagles 40

Eagles series audio interfaces are a Dante compatible networked audio technology device. They provide an economic solution for distributed audio via standard Ethernet switch and CAT5/CAT E6 cabling. They are PoE (power over ethernet) compatible, but can also be powered locally. They are available in 4input x 4output, all inputs/outputs can be set to either mic or line level.

    I/O Interfaces
See the product
glensound-AOIP44_1200px
  • Glensound

Glensound – AoIP44

The AoIP44 is an economical subrack designed to interface balanced analogue audio circuits to and from a Network audio system featuring Dante.  The AoIP44 is an economical subrack designed to interface balanced analogue audio circuits to and from a Network audio system featuring Dante. It provides 4 audio inputs to the network and also 4 audio outputs from the network on balanced 3 pin XLRs. As well as being mains powered with the standard signature backup DC powering option, the AoIP44 can be powered from an external PoE source via its network interface. The AoIP can be used as a simple low cost audio I/O break out unit on a large Dante audio network where it can be integrated extremely easily using the Dante controller and is fully compatible with any manufacturers Dante equipment. It can also be used in very simple audio over IP scenarios where just 4 bi-directional audio circuits are needed to be distributed across a buildings network infrastructure, in which case 2 x AoIP44 units can be used connected together across the network. The AoIP44 is equally suited for high integrity broadcast purposes, intercom, just simple paging facilities or simple distribution of non-critical audio. Being part of our Signature Range the AoIP44 comes as standard with removable rack ears (to allow front or rear mounting in 19" racks), mounting holes to allow under desk mounting (the holes are equally suited for screwing the unit into odd places!) and an optional external DC power supply for applications requiring redundant power supplies. It is housed in an all anodised aluminium chassis.
    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit
See the product