Cart
← Back to Product Catalog

QX-4300D

Amplifiers

More Details

Similar Products

nexo-dtd-amp-4x07_400px
  • Nexo

NEXO – DTDAMP 4×0.7

Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms).  Ideal for powering mobile or fixed installations of NEXO ID and PS Series systems, the 4-channel, 1U rack-mounting DTDAMP is available in two versions: 4 x 700 Watts and 4 x 1300 Watts (4 x 4 Ohms). The DTDAMP partners perfectly with the touring and install versions of the DTD Controller to create a compact, light-weight, intelligent powering solution that’s easy to configure – either in a ‘dry hire’ application where the user has limited knowledge, or in a fixed installation such as a bar or club. 
    Amplifiers
  • Dante Ch: 2 In
  • 24-bit
See the product
201982122246
  • BARE

BARE – WD60

    The network audio power amplifier integrates a two-way digital power amplifier module. Signal processing and power amplification are solved on one motherboard, which shortens the signal path and simplifies engineering wiring.

  • Built-in 2x600W / 8Ω (800W / 4Ω) digital power amplifier
  • Professional PC-side control software is easy to use, Ethernet TCP / IP online management, can manage every device in the system at the same time
  • ★ DANTE network audio technology, low latency without interference, without loss of smooth and full sound quality
  • Network dual backup, multiple devices can be connected hand in hand
  • ★ Automatic or manual network IP configuration, can be named independently for easy identification in the network
  • Automatic protection memory function in case of power failure
Output Power
Output power 8 ohms: 2x600W 
Output power 4 ohms: 2x800W
Bridge mode 8 ohms: 1600W
Power amplifier
Maximum efficiency of 90% , two-channel digital power amplifier
Frequency Range
20Hz-20kHz
Signal to noise ratio
100dB / 95Db
Sensitivity
26dB / 1.4V / 32dB
Crosstalk
＞90dB
Damping coefficient
＞500
Voltage gain
40dB
Total harmonic distortion
＜ 0.1%
Voltage conversion frequency
＞70
Conversion time
＜1.5
Features
Input: 2 -way DANTE signal input
Protect power
Single channel: short circuit, DC output, low impedance; equipment: ultra low / high voltage, temperature, overload
Operation mode
Stereo, mono, bridged
interface
Input: 2 x RJ45      Output: 2 x XLR (up to)
Unit delay
<1.5ms
sampling
48k
Dimensions ( WxHxD ) mm
485x90x320mm
Weight ( kg )
6.6kg
    Amplifiers
See the product
CgAH6F_pWhOAdSKGAAC310gLzwI133
  • Soundking

Soundking – AKT800D

AK series Dante network amplifier, with analog /digital automatic backup switching function, the analog signal will switch automatically when there is a problem with the digital signal, ensuring that the signal is not terminated due to device failure. The product is divided into two channel and four channel two specifications, using Dante, AES digital audio input, 10 channel signal input can be matrix selection and mutual thermal backup, intelligent network monitoring, and center control. PFC switch power supply, high performance DSP sound control with FIR balance, AGC automatic overload protection, square wave self-load impedance suppression. Intelligent temperature control with overheat protection, constant resistance and constant pressure.

※Optional functions: remote switch, center control shutdown, remote maintenance, sound channel backup, speaker intelligent control and others.

Applications: Acoustic systems in large government projects, large stadiums, cultural centers, etc.

    Amplifiers
See the product