Cart
← Back to Product Catalog

Rane – HAL 1x

DSPs (Digital Signal Processors)

More details

Similar Products

AEQ BC2000 RACK FRONT
  • AEQ

AEQ – BC-2000D

The backbone of the BC-2000 D Router Digital Audio system is the double TDM bus, housed in the BC-2000 D frame, with the capacity to route, mix or distribute more than a thousand channels simultaneously. The TDM bus is divided into an input bus and an output bus, with the possibility of inserting DSP cards, achieving a higher DSP processing capacity. The system may be decentralized through the use of DANTE AoIP or MADI links as the interconnection between the different sub-frames. The BC-2000 D Routing system is also the heart and engine of AEQ’s commentary systems OLYMPIA.
    DSPs (Digital Signal Processors)
  • Dante Ch: 64x64
  • 24-bit
See the product
biamp-tesira-server-io-front|biamp-tesira-server-io-front
  • Biamp

Biamp – Tesira SERVER-IO

The Biamp Tesira SERVER-IO offers the flexibility to have scalable DSP and I/O in the same device, with up to three DSP-2 cards and up to 12 I/O cards, as well as Dante™, AVB, and/or CobraNet®. The SERVER-IO can support up to 12 standard Tesira I/O cards for up to 48 channels of audio I/O (e.g. mic and line level, VoIP, and telephone interface). The SERVER-IO can be configured with up to three total audio networking cards per server. The combinations of networking cards can include up to one AVB-1 Audio Video Bridging network card, up to two SCM-1 CobraNet network cards, and up to two Biamp DAN-1 Dante network cards in any configuration. An integral network card provides network connectivity for configuration and control of the Tesira network.
    DSPs (Digital Signal Processors)
  • Dante Ch: 64x64
  • 32-bit
See the product
kn-dsp100_
  • Kramer

Kramer – KN-DSP100

KN−DSP100 is a 19” 1U server with pre−installed Kramer Network Enterprise Management Platform and added DSP functionality.  KN-DSP100 is a 19” 1U server with pre−installed Kramer Network Enterprise Management Platform and added DSP functionality. In addition to the full functionality of Kramer Network, KN-DSP100 provides DSP over IP and enables simultaneous processing of 64 input channels and distribution to over 1000 outputs. The unit is fully compatible with any Dante™ audio signal and provides auto-detection of all Kramer devices and their functionality. KN-DSP100 seamlessly integrates with standard IT infrastructures and simplifies the user experience with a single point of contact for both management and support of all audio devices. The device’s processing capability is powered by Waves Audio™, the world-leading developers of audio DSP technologies.
    DSPs (Digital Signal Processors)
  • Dante Ch: 64x64
See the product