Cart
← Back to Product Catalog

RDL – RU-LB4

I/O Interfaces

More details

Similar Products

ru-nl2_400px|ru-nl2_400px
  • RDL

RDL – RU-NL2

The RU-NL2 is a high quality Dante network to line level interface. The RU-NL2 converts two Dante network audio channels to +4 dBu balanced line level that corresponds to a network digital audio level of -18 dBFS. LED audio signal indicators are provided. Model RU- NL2P operates from PoE. The RU-NL2 is a high quality Dante network to line level interface. The RU-NL2 converts two Dante network audio channels to +4 dBu balanced professional line level. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels. Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. Crosstalk is below the noise floor between the outputs across the entire audio spectrum. The RU-NL2 is also available in a PoE version (RU-NL2P). If PoE power and an external 24 Vdc supply are both feeding an RU-NL2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product
DNTBOB88-400px|DNTBOB88-400px
  • Lectrosonics

Lectrosonics – DNTBOB 88

DNTBOB 88 is a high quality, general purpose 8-in / 8-out interface to transmit and receive line level analog audio signals via a Dante network. Analog inputs are converted to digital and appear on the network as transmit channels. Audio for the analog outputs is taken from subscriptions to transmit channels on the network from other sources. When connected to a network, each break out box will appear as a separate device in the Dante Controller software interface.
    I/O Interfaces
  • Dante Ch: 8x8
See the product
Dante官网logo
  • BARE

BARE – DC-34

Features： 1. The integration of power over Ethernet and audio data transmission realizes simplified cable layout and conforms to Ethernet engineering specifications; 2. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 3. The built-in DSP network active speaker can remotely monitor and control the EQ of the active speaker, the voltage and current at both ends of the speaker on the PC side. 4. The sound column is made of wooden box body, sandblasted surface treatment, the sound is loud and powerful. 5. Automatically assign IP address through router DHCP; 6. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 8. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
See the product