Cart
← Back to Product Catalog

RDL – RU-NL4P

I/O Interfaces

More details

Similar Products

glensound-AOIP44_1200px
  • Glensound

Glensound – AoIP44

The AoIP44 is an economical subrack designed to interface balanced analogue audio circuits to and from a Network audio system featuring Dante.  The AoIP44 is an economical subrack designed to interface balanced analogue audio circuits to and from a Network audio system featuring Dante. It provides 4 audio inputs to the network and also 4 audio outputs from the network on balanced 3 pin XLRs. As well as being mains powered with the standard signature backup DC powering option, the AoIP44 can be powered from an external PoE source via its network interface. The AoIP can be used as a simple low cost audio I/O break out unit on a large Dante audio network where it can be integrated extremely easily using the Dante controller and is fully compatible with any manufacturers Dante equipment. It can also be used in very simple audio over IP scenarios where just 4 bi-directional audio circuits are needed to be distributed across a buildings network infrastructure, in which case 2 x AoIP44 units can be used connected together across the network. The AoIP44 is equally suited for high integrity broadcast purposes, intercom, just simple paging facilities or simple distribution of non-critical audio. Being part of our Signature Range the AoIP44 comes as standard with removable rack ears (to allow front or rear mounting in 19" racks), mounting holes to allow under desk mounting (the holes are equally suited for screwing the unit into odd places!) and an optional external DC power supply for applications requiring redundant power supplies. It is housed in an all anodised aluminium chassis.
    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit
See the product
linea-research-dante-bridge_600px
  • Linea Research

Linea Research – Dante Bridge

The Dante Bridge allows several different classes of audio product to be seamlessly integrated into Dante systems with the minimum of fuss. Analogue outputs allow the Bridge to be used with products which have analogue inputs.  The Dante Bridge allows several different classes of audio product to be seamlessly integrated into Dante systems with the minimum of fuss. Analogue outputs allow the Bridge to be used with products which have analogue inputs. The AES3 output allows the Bridge to be used with products which have an AES3 input. The BvNet connection also allows equipment which has a BvNet control interface to be controlled over an Ethernet network, to which the PodWare application will connect directly.
  • Two analog outputs
  • AES3 output
  • Ethernet control for BvNet products
  • Rugged steel enclosure
  • Free-standing or rack-mount options
  • Power Over Ethernet (PoE)
  • Optional power by companion PSU
The control data within Dante is bidirectional, and can flow from the Dante network to a BvNet device and vice-versa. Similarly, digital audio channels within the Dante network can be routed to the BvNet socket, so that the AES3 signal is conveniently available on the BvNet network, where it can be brokenout using a special cable for use as an AES3 feed. The same audio channels are also available on analog outputs for use with any devices with analogue inputs.
    I/O Interfaces
  • Dante Ch: 2 In
  • AES67 Enabled
See the product
AMX-DGX3200-ENC_1200px
  • AMX

AMX – DGX3200-ENC

The new Enova DGX 3200 Enclosure (DGX3200-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content.  The new Enova DGX 3200 Enclosure (DGX3200-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content. This robust solution includes a NetLinx® NX Integrated Controller, redundant power supplies and can be populated with Enova DGX video input and output boards in addition to optional audio -switching boards. There are four connections per video board, and each enclosure holds eight video input boards and eight video output boards for a maximum matrix of 32x32. The Enova DGX 3200 adds several new capabilities such as automatic setup of DXLink endpoints, single IP addressing for multiple endpoints, and a new web interface to greatly simplify installation and configuration. The new advanced Audio Switching Boards add audio breakaway capabilities and parametric EQ on each DGX output. The Enova DGX 3200 is far beyond a modular media switcher with built-in controller – it functions as the centerpiece of a complete integrated solution that manages and distributes analog and digital audio and video including HDMI/HDCP, control and Ethernet. Easily integrate HDCP into system designs and enjoy hassle-free plug-and-play operation. No tools, no delays and no key constraints – it just works with AMX's exclusive InstaGate Pro® Technology. Built for today's and tomorrow's needs, a comprehensive set of Enova DGX boards can be used in conjunction with DXLink and DGX Transmitters and Receivers to provide an end-to-end distribution system over twisted pair cable or fiber. An integrated NetLinx NX Controller and embedded Ethernet switch enables management of the entire solution including source equipment and display devices located throughout the environment – all from a single point of control. In addition to eliminating HDCP delays, InstaGate Pro allows traditionally key limited sources to be switched freely to all connected HDCP compliant displays – eliminating HDCP key limitations that plague large applications. Built-in SmartScale® Technology on every output provides video that is perfectly scaled for each connected display, eliminating the integration challenges that can occur when sources and displays have different supported resolutions – making it easy to specify, easy to install and easy to use. With the powerful combination of analog-to-digital signal conversion, video scaling and high speed digital switching the system delivers perfect video every time – regardless of signal type. As part of a complete distribution system, easily send analog or digital audio and video including HDMI with HDCP signals, plus control 10 Km over single mode fiber or 300 meters over multimode fiber; send all this plus power up to 100 meters over standard twisted pair cable to and from the Enova DGX using the DXLink Twisted Pair and Fiber Transmitters/Receivers.
    I/O Interfaces
See the product