Product Information
Dante Audio Networked Enabled Speaker System
Similar Products
- K-array
K-array – KMT218
KMT218 is much more than a standard dual 18" powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm.
KMT218 is much more than a standard dual 18" powered subwoofer. The amplifier mounted on board is Class D, delivering 2 x 2399 W at 4 Ohm. All DSP functions, including EQ can be controlled with remote managing software via USB or RS485 on a standard XLR. To optimize performance, the onboard DSP includes presets to drive K-array speakers. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.
- Speakers
- Dante Ch: 2 In
- 24-bit
- Magnetic
Magnetic – PK-828A+Dante
| Model: | PK-828A+Dante |
| LF Unit: | 8" x2(neodymium) |
| HF Unit: | 1.75"x1(neodymium) |
| Cabinet and paiting: | Birch of plywood and Polyurea |
| Frequency Response: | 55Hz-18KHz(±3dB) |
| Nominal Impedance: | LF 4ohm,HF 8ohm |
| Input Sensitivity: | 108dB (1W/1m) |
| AES Power: | 800W LF,70W HF |
| Peak Power: | 1600W LF,100W HF |
| Max SPL: | 132dB |
| Input Connector: | 1xXLR female+1xXLR male1xVolume,1xpreset,USB,Dante |
| Amplifier @THD1%RMS: | 800Wx800W@4ohm |
| DSP: | 96KHz sample rate,floating point DSPPhase,All past filter,12 EQ,Crossover,Limiter1000ms for each input and outputDriver freeAPP for IOS/Androi(new version) |
| Dante: | Yes |
| WIFI: | Ethernet by TCP/IP |
| Standby and Green energy: | Yes(<0.9W) |
| Working Voltage: | 85-265V,with PFC |
| Dimensions(WxDxH): | 280x335x693mm |
| Weight: | 23kg |
- Speakers
- DSPPA
DSPPA – D6463
● Comply with Dante Network System
● Built-in 2x25W/2x50W digital amplifier
● Can play music, paging and alarm from the console
● One AUX input, one AUX output, 100V input
● 1 AUX output of RCA for power extension
● LED screen indicator for display status
- Speakers