Renkus-Heinz – ICL-F-RD


More details

Similar Products

Amadeus_PMX_12D_1000px|Amadeus_PMX_12D_1000px
  • Amadeus

Amadeus – PMX 12 D

The PMX 12 D system hosts a coaxial driver with a 12-inch (30 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 12 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms. The PMX 12 D system hosts a coaxial driver with a 12-inch (30 cm) neodymium woofer (LF) and a 2-inch diaphragm compression driver (HF). The PMX 12 D is bi-amplified using two dedicated high resonance digital amplifiers, featuring outstanding efficiency, with each amp delivering 1500 Watts (LF) and 400 Watts (HF) under 8 ohms.  Each speaker channel is under control by a powerful, 64-bit digital processing unit capable of a 118 dB dynamic range. Each of these on-board DSP units include a module dedicated to managing core system parameters including system EQ, time alignment between sections, limiting, and transducer thermal protection. This level of control makes the PMX D Series fully protected and able to operate at the full extent of its abilities.
    Speakers
kevic-ks1151SPN
  • Kevic

Kevic – KS-1151SPN

The Kevic KS-1151SPN is a single 15" active network subwoofer speaker with Dante. The Kevic KS-1151SPN is a single 15" active network subwoofer speaker with Dante. Features:
  • 15" network subwoofer speaker
  • Lossless & Noiseless System by Dante Ethernet Transmission
  • Optimization preset value apply by DSP
  • Maximization of damping factor by D-Class power amplifier
  • Ultralight voice coil and top class material are applied
  • Simple system with DSP and power amplifier
  • Can use as wedge monitor speaker
    Speakers
Montarbo_-_WIND_PRO_215A
  • Montarbo

Montarbo – WIND PRO 215A

Montarbo® WIND PRO 215A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Montarbo® WIND PRO 215A is an active acoustic loudspeaker designed to guarantee extremely high performances in terms of power and quality. Features
  • Very high performance-to-size ratio
  • 2-channel amplifier 1200 W + 1200 W RMS
  • 141 dB SPL
  • Quasi 3-Way acoustic design
  • 15” neodimium coaxial speaker with 3” voice coil and 1,4” driver with 2,4” voice coil
  • 15” ferrite woofer with 3” voice coil
  • 70° horizontal, 50° vertical coverage
  • 24 Bit 96 kHz DSP with M-Modelling Technology
  • Integrated DANTE
  • M-Modelling Technology
  • Compatible Softwares: M-Connect and M-Simulation
  • Wi-Fi Connection
  • M-ID authentication system via app
  • Integrated Rigging
    Speakers
  • Dante Ch: 2 In
  • 24-bit