Cart
← Back to Product Catalog

RTS – KP-4016PB Keypanel

Intercoms

More details

Similar Products

rts-adam-m_1200px|rts-adam-m_1200px
  • RTS

RTS – ADAM-M

The ADAM-M is a mid-size modular matrix intercom. The ADAM-M is a mid-size modular matrix intercom.
  • 8 GPIO's Standard per Frame
  • Compatible with most all Current & Legacy RTS Digital Matrix Intercom Keypanels & Accessories
  • Dual-Purpose Ports Support BOTH Keypanel and Four-Wire Audio
  • Supports Fully Redundant Power Supplies & Controllers
  • Individual Cross-Point Level Controls
  • Integrated Support for RTS Intelligent Trunking
  • Multi-Level IFB, ISO, Party Lines, Groups, and GPI's all STANDARD
  • Non-Volatile Configuration & Crosspoint Memory
  • RealTime Online Configuration & Monitoring
  • RTS UPL (User-Programmable Language) for Custom System Configurations via Pull-down Menus
  • Supports 16 to 880 users per system based on 3 RU frame(s)
  • Supports Custom Cards for Widely Used Industry Interface
  • Widest Variety of Interface Cards in the Industry
  • Widest Variety of Wiring Options in the Industry
    Intercoms
  • Dante Ch: 128x128
  • 24-bit
See the product
ctp-systems-FWD6006s|ctp-systems-FWD6006s
  • CTP Systems

CTP Systems – FWD6006

The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. The FWD6006 is a six channel desktop version of our FWD8000. It is a Dante enabled four wire box with six four wire inputs, six four wire outputs plus six IFB inputs. A mix output and a hot microphone output are also available on the network. In addition to the network connections three of the four wire inputs and outputs are mirrored onto the rear of the unit for local analogue use as well as two IFB inputs. Power may be supplied by PoE, an external 12 volt supply or battery or via the IEC mains inlet. Each channel has a cut switch, a ifb monitor button plus a vox incoming audio present indicator. Press the talk keys down for momentary operation and up to latch. The latch operation can be defeated if required. Units can be supplied with a headphone jack or a 5 pin XLR headset connector. There is also a microphone cut button. When a talk key is pressed incoming audio to the loudspeaker is normally dimmed to prevent feedback, the level may be adjusted or defeated as required. The FWD6006 has a secondary ethernet interface which may be used a switch output or for network redundancy. Mains requirement is 110-240VAC 50/60Hz. Dimensions: 100mm high, 180mm deep, 200mm wide.
    Intercoms
  • Dante Ch: 16x16
  • 48kHz-96kHz
See the product
large-FSEdge_Beauty_Base_Front_Straight
  • Clear-Com

Clear-Com – FreeSpeak Edge Base Station

The FreeSpeak Edge base station is a standalone 1RU device that provides extensive connectivity to a wide range of Clear-Com endpoints along with third-party Dante devices. Built primarily to deploy digital audio connections and IP transceivers, the base station also provides support to FreeSpeak II and Edge beltpacks, 1.9 GHz E1 and IP transceivers*, and 2.4 GHz E1 transceivers.

    Intercoms
  • Dante Ch: 8x8
  • 24-bit
See the product