Cart
← Back to Product Catalog

RXT-4D

Microphones

More Details

Similar Products

audix-M70wd
  • Audix

Audix – M70WD

The M70WD is a steerable, flush-mount condenser microphone designed for distance miking in a variety of applications, including video conferencing, distance learning, hospital rooms, surveillance, and ambient room miking. The flush-mount configuration and a footprint of only three inches in diameter allow the M70WD to virtually disappear.

The M70WD capsule is housed within a patented cradle that allows the microphone to be aimed up to an angle of 45 degrees. Other features include a fully integrated preamp and an extremely high sensitivity rating of 38 millivolts. In addition, the M70WD has complete immunity from RF interference caused by cell phones and GSM devices. Installing the M70WD requires just one 2-inch hole in the ceiling, with no additional tools needed.

Features

  • High output for distance miking
  • Aimable up to a 45-degree angle
  • Miniaturized integrated preamp circuitry
  • Immunity from RF interference
  • Two-color LED status indicator
  • RJ45 connectors for plug-and-play integration with the Audix Dante | AES67 Integrated Microphone System
  • No external power adaptor required
  • Designed, assembled, and tested by Audixin the USA
  • 3-year warranty
     

Dante Made Simple - By Audix

The M70WD is designed exclusively for the Audix Dante | AES67 Integrated Microphone System , which delivers high-quality audio and all microphone functions - including on-off contact closure and LED status indicators - through a single CAT5 - CAT7 cable with RJ45 connections. This simple configuration eliminates wiring errors, accelerates installation, and reduces cost. And like all Audix microphones in the system, the gain structure is optimized for its intended use, providing quality audio at the DSP. The result is true plug-and-play installation.

    Microphones
See the product
audix-m3|audix-m3
  • Audix

Audix – M3

The M3 is an innovative, tri-element hanging ceiling microphone designed for applications where aesthetics, sound quality, and ease of installation are critical. The M3 is an ideal audio capture solution for video conferencing, distance learning, courtroom activities, and surgical procedures. It can also be used for ambient room miking and surveillance. The M3 ceiling microphone incorporates three phase coherent hypercardioid capsules with tailored frequency response optimized for speech intelligibility. This is accomplished by minimizing frequencies caused by noise, vibration, paper shuffling, keyboard strokes, fans, and heating /air conditioning. Low noise preamp circuitry is employed for highest possible signal to noise and studio quality sound. A high-quality silicone jacketed microphone cable ensures a balanced, shielded signal and a very clean look. Electronics above the ceiling are housed within a plenum rated junction box and cable connections are made via an RJ45 connector embedded within a proprietary brass housing for an airtight seal. The M3 installed ceiling microphone connects to the input of a mixer or dsp console via a breakout cable (provided). The breakout cable consists of a female RJ45 connector that terminates in either three terminal block or XLR connectors. A variety of optional shielded CAT7 cable lengths (from plenum rated junction box to break out cable) are available. Installing the M3 requires drilling just one 5/8-inch hole in the ceiling, with no additional tools needed. The M3 mounting hardware easily adjusts the cable hanging height up to four feet from the ceiling surface without removing ceiling tiles. A wire safety cable provides additional seismic restraint. Features
  • 100% RF shielding and immunity
  • Gold diaphragm condenser capsules with studio quality sound
  • Low impedance design allows for extremely long cable runs (if required) without cross talk or interference
  • Frequency and pattern tailored for voice clarity and rejection of extraneous noise
  • Evenly dispersed sound with undetectable phase
  • High-quality silicone jacketed microphone cable with adjustable length and position
  • Plenum rated junction box with RJ45 connector
  • All visible components of the microphone and cable are same color: charcoal or white
  • TAA compliant
  • Very high output, low self-noise
  • Easy to install
    Microphones
See the product
ied-5404CS_1200px
  • AtlasIED

AtlasIED – IED5404CS

TheAtlasIED5404CS digital microphone station is a 4-button device for initiating audio / visual announcements, messages and pages with the 5400ACS Announcement Control Systems. Just likeAtlasIED’s other digital microphone stations, the 5404CS uses a single Ethernet interface for audio and control data.  The 5404CS is fully compatible with IEEE 802.3af standard for Power over Ethernet (PoE), allowing the microphone station to be powered directly from any standard off-the-shelf PoE switch.The 5404CS utilizes Dante™ technology for transporting high-quality, low-latency digital audio over Ethernet. The 5404CS microphone station may be used as part of an EN54-16 listed life safety system; although the mic stations themselves are not EN 54-16 listed and cannot be used for the emergency locations.  Instead, in a dual-use system, these microphone stations may be used for everyday paging functions.
    Microphones
  • 24-bit
  • 48kHz
See the product