Cart
← Back to Product Catalog

Salzbrenner – NIO xcel 1102

I/O Interfaces

More details

Similar Products

aurora-VLX-TCW2V-C
  • Aurora Multimedia

Aurora Multimedia – VLX-TCW2V-C

The VLX-TCW2V provides one of the most advanced IP Streaming solutions on the market utilizing Aurora’s IPBaseT® technology, which synergizes various IP/AV standards to work together as one.  The VLX-TCW2V provides one of the most advanced IP Streaming solutions on the market utilizing Aurora’s IPBaseT® technology, which synergizes various IP/AV standards to work together as one. It is the industry’s first 4K UHD transceiver with only 1.5 frame (25ms) latency and visually lossless compression. The VLX-TCW2V has 1 VGA and 1 HDMI port. Using a transmitter (encoder) and receiver (decoder), respectively, used to be the standard – until now. The VLX-TCW2 Series can be set up as either one to make installation, inventory, and troubleshooting easier.
    I/O Interfaces
  • Dante Ch: 2x2
  • 16-bit, 24-bit
See the product
extron-axi02at
  • Extron Electronics

Extron – AXI 02 AT

The Extron AXI 02 AT is a compact audio interface that extracts two channels from a Dante® audio network. The Extron AXI 02 AT is a compact audio interface that extracts two channels from a Dante® audio network. This Dante Audio Interface provides two channels of audio output from the network to devices without Dante connectivity. It features two line level analog outputs on captive screw connectors with a mirrored two-channel S/PDIF output on a coaxial RCA connector. The AXI 02 AT interfaces with a Dante audio network over a standard local area network, and is powered through PoE. The AXI 02 AT includes a ZipClip® 100 Mounting Kit and is compatible with Extron Rack Shelves and ZipClip 200 mounting solutions.
    I/O Interfaces
  • Dante Ch: 2 In
  • 24-bit
See the product
rdl-dd-bn40_1200px|rdl-dd-bn40_1200px
  • RDL

RDL – DD-BN40

The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. Each output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN40 is PoE powered, and is available in multiple finishes with optional customized graphics. The four XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The outputs are connected through a detachable terminal block. The outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN40. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN40 in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN40 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN40’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces
See the product