Cart
← Back to Product Catalog

Salzbrenner – NIO xcel 1202

I/O Interfaces

More details

Similar Products

neutrik-DANTE_Adapter-NA2-IO-DLINE|neutrik-DANTE_Adapter-NA2-IO-DLINE
  • Neutrik

Neutrik – NA2-IO-DLINE

This ruggedized handy box lets you connect your legacy audio gear to the Dante™ world. It works both as a ramp-on device to convert an analog LINE signal into a Dante™ signal and as a ramp-off box to come out of the Dante™ network with an anlog signal. Both can happen siumultaneously! The NA2-IO-DLINE is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a Dante™ network. Simultaneously, NA2-IO-DLINE converts a Dante™ stream into analog audio signals. Hence, it is possible to use this tiny box to feed analog audio signals into the Dante™ network while at the same time receiving a mix from another Dante™ source. NA2-IO-DLINE is designed for harsh stage conditions. It therefore features lockable chassis connectors for both the audio and network connections. For fixed installations, the rubber protection can be removed. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks.
    I/O Interfaces
  • Dante Ch: 2x2
  • 16-bit, 24-bit, 32-bit
See the product
mansiondic3533a
  • Mansion

Mansion – DIC3533A

DIC3533A is a high quality Dante interface box for converting four Dante channels to Analogue Audio outputs, and four Analogue Audio inputs to Dante network. Line Input/Output on the front panel accept Stereo or Mono signal by switches. Features: *Two Mic/Line XLR Inputs and One Mini-jack Input on Front Panel *Terminal Block for Two Audio Outputs on Rear Panel *One Mini-jack Output on Front Panel *Converts Mic or Line Audio Signals to Dante Network *Mic or Line is Selectable for Each XLR Input *Switchable 48V Phantom Power for Each Mic XLR Input *Adjustable Mic/LIne Gain from -20 dB to +20dB for Each Input Channel *Stereo/Mono switch for Mini-jack Input and Output *Four Audio Signal Outputs from Dante Network *Balanced or Unbalanced Signal Outputs *High Resolution 24 Bit for DAC and ADC *Power over Ethernet (PoE) or 24VDC power supply *Provides High Quality of Preamplifier for Microphones *Dimension: 116mm x 114.5mm x 53.1mm (WHD)
    I/O Interfaces
See the product
Dante官网logo
  • BARE

BARE – D-10

Features： 1. A distributor connecting the host and the generator unit; 2. Provide 4 RJ45 wires, 2 of which are used for manual connection between junction boxes, and 2 are used to connect the transmitter unit; 3. Hand-pull connection method, with 2 CAT6 and over Category 6 wires; 4. Each junction box can be connected to 2 transmitter units; 5. The sending unit connected to the unit with chairperson is the chairperson unit, and the others are the representative units.
    I/O Interfaces
See the product