Cart
← Back to Product Catalog

Shure – ANI4IN-XLR

I/O Interfaces

More details

Similar Products

14845500171245
  • DVAE

DVAE – DANTE 8i8o

DANTE 8i8o is an 8-in 8-out cobranet network audio interface machine. It follows the DANTE network audio standard to meet high-demand professional audio signal transmission. Supports 8-channel microphone/line analog audio input and 8-channel balanced analog signal output. Each input channel supports independent 48V phantom power supply and independent gain control. The open TCP/IP and RS232 control protocols allow third-party software to control the analog gain and 48V switch.

    I/O Interfaces
  • Dante Ch: 8x8
See the product
Dante官网logo
  • BARE

BARE – BE-1616D

The network audio processor is a network audio processor with 32 inputs (16 analog and 16 digital) and 32 outputs (16 analog and 16 digital), using the industry-leading ADI DSP SHARC21489 chip , The highest operating frequency can reach 450MHz. The input and output modules of the DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the needs of audio processors and transmissions in various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.
    I/O Interfaces
See the product
rdl-dd-bn2ml_1200px
  • RDL

RDL – DD-BN2ML

front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2ML.  front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2ML. The XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. The Mini-jack input accepts mono or stereo unbalanced line-level sources that are summed to mono. Each rear-panel output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN2ML fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN2ML is PoE powered, and is available in multiple finishes with optional customized graphics. The XLR input is converted to feed one Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. The Mini-jack left and right inputs are summed to mono to feed one Dante network transmit channel. This input provides a network digital audio level of -18 dBFS for an unbalanced -10 dBV input. Two Dante audio channels are converted to balanced line level on the rear-panel detachable terminal block. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN2ML. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN2ML in a triple gang box or may be mounted remotely in a single box. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN2ML is a professional grade product with a discrete mic preamplifier for studio quality fidelity and low noise performance, coupled through a metal XLR jack housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN2ML’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces
See the product