Cart
← Back to Product Catalog

Smart pi – Smart pi NAM

Amplifiers

More details

Similar Products

ied-DNA2404DH_1200px
  • AtlasIED

AtlasIED – DNA2404DH

The DNA2404DH amplifier is an integral part of theAtlasIED GLOBALCOM® Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The DNA2404DH amplifier is an integral part of theAtlasIED GLOBALCOM® Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifier features Audinate's Dante™ digital audio input and four channels of 600 watt amplification. The DNA2404DH is controlled with network commands for selecting input routing and configuring EQ, delay and output levels. Amplifiers may be controlled by a stand-alone GLOBALCOM® configuration utility or through the GLOBALCOM System Management Center.The internal amplifier cards are Class D (switching mode) dual channel 600W amplifiers into the rated loads (100-Volts into 16Ω). Class D operation, combined with an integral switching mode power supply, offers many advantages, and the uniqueAtlasIED design makes full use of these benefits. They include higher efficiency, increased reliability, improved performance, and lower operating cost. Switching mode operation combined with high voltage power MOSFET devices make it possible to eliminate the heavy, costly, bulky transformers.AtlasIED’s design is stable under all load conditions (phase angles of 0 to 360 degrees). The amplifier card has 34dB of gain from its analog input to the loudspeaker output. Attenuation is handled ahead of the power amplifier by DSP controls through software.
    Amplifiers
  • Dante Ch: 4 In
See the product
AVS-40D
  • Seikaku

Seikaku – AVS-40D

1. Terminal Amplifier, 40W output power.
  2. One-way RD port for connecting remote controller.
  3. Two-way MIC/LINE input with phantom power.
  4. Two DANTE network interfaces .
  5. Automatically fault detected: speaker Line /Control input connection/device local fault etc.
  6. Electrical parameter:
     -Max input : 10dB
     -Noise floor <-88dB
     -THD+N<0.05%@1/8 Power
     -Frequency response : 20~16KHz
     -Speaker ouput : 40W ,4 ohm ,SNR>85 dB

    Amplifiers
See the product
sonible-d24
  • Sonible

Sonible – d:24

Sonible’s d:24 multi-channel amplifier delivers brilliant sound for high-end audio installations in science, research, and industry: reliable, true to the signal and unique in its class. Sonible’s d:24 multi-channel amplifier delivers brilliant sound for high-end audio installations in science, research, and industry: reliable, true to the signal and unique in its class. As a true team player, the d:24 effortlessly cooperates with pre-installed systems. The analog inputs of the base model are expandable with three different digital input options: MADI (coaxial and optical), DANTE and AES/EBU. All digital modules are equipped with high-end D/A converters and allow free routing of every single channel. The good news: the modules can easily be retrofitted. For maximum comfort with every installation, the d:24 comes with a set of convenient signal processing tools. The optional DSP module offers an equalizer, a compressor, a limiter, and a delay. Even with complex installations, the multi-channel amplifier can thus function as a compact all-in-one solution. Thanks to Ethernet-interface and web-applications, all of the amplifier’s features can be remote-controlled. The web-based control makes it possible to make instant adjustments to the system from any location. The DSP option can be remote-controlled in the same way.
    Amplifiers
See the product