Product Information
Sommer cable’s SPY-EDAO-C2 is a 2-channel Ethercon Dante®-Analog-OUT-Converter.
Sommer cable’s SPY-EDAO-C2 is a 2-channel Ethercon Dante®-Analog-OUT-Converter.
Similar Products
- BARE
BARE – DE-8
Features：
1. The audio signal and power transmission of the speaker are realized
through the same network cable.
2. The RJ45 interface on the back panel of the box is equipped with XLR
firmware, which can be used for waterproofing and strengthen the connection
between the box and the wire.
3. The network cable realizes signal transmission and power supply;
4. The IP address is automatically assigned through the router DHCP;
5. Each receiving channel can be controlled independently, and it can be
applied to any location in the local area network
1. It has high efficiency and high sound energy output, excellent sound
quality, perfect protection function and good electromagnetic compatibility
characteristics.
7. The built-in DSP network active speaker can remotely control the EQ and
pressure limit of the active speaker on the PC side.
8. It has complete protection functions (short circuit protection, over
current protection, over and under protection, DC protection, power limit,
temperature limit, long-term output power limit, clipping limiter).
9. The speaker uses Dante digital audio interface and PoE network power
supply to drive the power amplifier module, and only one network cable is
needed to realize the simultaneous supply of audio signal and power.
- I/O Interfaces
- Dante Ch: 8 In
- AISPEECH
DU11 Dante Audio Adapter
It designed to connect personal computers or conference hosts to a Dante audio network without the need for software installation.
- I/O Interfaces
- 24-bit
- 48kHz
- Amphenol
Amphenol – RJD2203-0050
Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and two AX series XLR analogue inputs in a molded housing.
Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante output, and two AX series XLR analogue inputs in a molded housing.
Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.
- I/O Interfaces