Cart
← Back to Product Catalog

SoundTube – IPD-CM82-BGM

Speakers

More details

Similar Products

h-12-h-15_400px
  • VUE Audiotechnik

VUE Audiotechnik – h-12W

The h-12 is available in both wide and narrow coverage versions, while built-in pole mounts and optional rigging hardware allow easy deployment as a main system, or in a variety of support configurations. The h-12 is available in both wide and narrow coverage versions, while built-in pole mounts and optional rigging hardware allow easy deployment as a main system, or in a variety of support configurations. The h-12W provides 100º x 50º coverage and the h-12N  provides 60° x 40° coverage, respectively. The Powerful built-in amplification supplies 830 watts LF and 275 watts HF power long term sine wave to each driver (more than 2400 watts total peak) for very high size-to-output ratio.
    Speakers
See the product
soundtube-IPD4-CM62-BGM_1200px|soundtube-IPD4-CM62-BGM_1200px
  • SoundTube

SoundTube – IPD4-CM62-BGM

The IPD4-CM62-BGM is a 6.5-inch in-ceiling Dante speaker with connection and power for up to three additional non-Dante SoundTube speakers. The IPD4-CM62-BGM gives integrators an economical way to expand in-ceiling speaker zones on a Dante network. This speaker incorporates a 6.5-inch (165 mm) polypropylene woofer with rubber surround and 1-inch (25 mm) silk dome tweeter in a ported steel backcan. In addition to its PoE connection to the SoundTube STNet Switch, the IPD4-CM62-BGM can power up to three additional non-IP speakers. Each IPD4 speaker can be broken down into 2 channels; IPD4 speakers are matched in a system with standard passive SoundTube speakers of the same type. All IPD4 speakers come in both an active and a passive version. As with SoundTube's other IPD in-ceiling speakers, IPD4 speakers feature BroadBeam Ring technology for broad, even dispersion of high frequencies and include SoundTube's exclusive SpeedWing quick-mounting technology.
    Speakers
See the product
CNET8D
  • DMIX

DMIX – CNET8D

Technical parameters：

Speaker model: CNET8D

Speaker type: 8" Active two-division loudspeaker

Unit configuration: 8"(200mm) woofer 1"(25mm) Treble driver

Frequency response: 80Hz-19kHz

Rated power: 100W

Sound pressure level: 115dB

Sensitivity: 92dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×80°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 100W

Volume knob control: Yes

Central control interface: RS232

Size (mm) : 250×391×235 (W×H×D)

    Speakers
See the product