SoundTube - STNet-Switch

SoundTube – STNet-Switch

Product Information

Rack-mountable 16-port 40W PoE switch for use with SoundTube’s Dante-enabled in-ceiling and surface-mount speakers.

The STNet-Switch is a 16-port, 40 watt PoE switch designed for use with SoundTube’s Dante-enabled speakers. (The speakers may also be used with a standard PoE or PoE Plus switch.) The STNet-Switch provides 40 watts Power over Ethernet to each SoundTube speaker on the network and manages report-back information from the speakers. A Dante system controller DSP is connected to the STNet-Switch via one of the two provided gigabit Ethernet ports; up to 16 speakers may be connected directly via one switch. Multiple switches may be linked via the second gigabit Ethernet port

Arvus – H2-4D

H2-4D , the world’s first dedicated 16 channel DOLBY ATMOS ® digital audio renderer

Primary functions:

Convert up to 16 Channels of HDMI audio simultaneously to:
DANTE® (AES67 included)
BALANCED
ANALOG
HDMI® (Audio Only)
AES/EBU (AES3)

Render:
DOLBY Atmos®
DTS X ®

Decode:
DOLBY® - Dolby Digital, Dolby Digital Plus, Dolby TrueHD , Dolby Surround (from Atmos
DTS® - DTS, ES, HD Master Audio, HD High Resolution Audio, Express HD LBR, Neural:X
PCM - 2ch, PCM Multi channel, Downmix

Speaker Management Processors

See the product

Ashly Audio

Ashly – ne4400t

Connecting and controlling an audio processor for networked systems is simplified with Ashly’s ne Digital Signal Processors. Complimentary to Ashly power amplifiers, the ne4400t (4 in/4 out) offers easy setup, uses standard 10/100 Ethernet protocol and features Ashly’s Protea™ ne Software. Standard units are analog line with four option bays supporting network audio and mic input options. The DSP signal processing library is extensive and utilizes multiple SHARC 32-bit processors with sample rates of either 48kHz or 96kHz.

Speaker Management Processors

See the product

Monacor

Monacor – DSM-48DT

Due to the Dante™ interface, it is possible to conveniently integrate the speaker management system DSM-48DT as a 2-channel receiver into a Dante™ audio network. Both of the Dante™ signals are available for the input channels IN3 and IN4, alternatively to the analogue inputs and the digital input. Due to the Dante™ interface, it is possible to conveniently integrate the speaker management system DSM-48DT as a 2-channel receiver into a Dante™ audio network. Both of the Dante™ signals are available for the input channels IN3 and IN4, alternatively to the analogue inputs and the digital input. Thus, the DSM-48DT allows you to receive one stereo audio signal or two mono audio signals from other Dante™-enabled devices which are located in the same subnetwork and to process this/these in the same way as an analogue signal or AES/EBU signal. Speaker management systems featuring analogue inputs as well as outputs and additionally provide a Dante™ interface are called Breakout Boxes. In order to use the DSM‑48DT as a receiver unit, it has to be connected to at least one Fast Ethernet switch (100 Mbps Ethernet).

Speaker Management Processors

See the product

SoundTube – STNet-Switch

Product Information

Similar Products

Arvus – H2-4D

Primary functions:

Ashly – ne4400t

Monacor – DSM-48DT

Stay connected to Dante

Support

Company

Dante Networking Alliance