Cart
← Back to Product Catalog

SSL – MADI-Bridge

I/O Interfaces

More details

Similar Products

SSL-Network-IO_D64
  • Solid State Logic

SSL – Network I/O D64

The Network I/O D64 provides 32 input/output Pairs of AES3 audio I/O connectivity to redundant Dante network connections.  The Network I/O D64 provides 32 input/output Pairs of AES3 audio I/O connectivity to redundant Dante network connections. Sample Rate Convertors allow seamless integration of unlocked AES sources. D64 includes redundant network connections and PSUs.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit, 32-bit
See the product
digigram-AUDIOWAY-bridge-B3_1200px_0
  • Digigram

Digigram – Audioway Bridge B2

The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio. The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio.
  • Stainless steel 1U chassis power consumption <50 W
  • Front panel control interface for rapid overview of current status
  • Dual AC/DC power supply 4 configurable GPIOs Wordclock synchronisation 24-bit audio routing: 44.1 kHz to 96 kHz
  • AES67/Dante interface: 64-in/64-out EtherCON connector AoIP stream redundancy Integrated 4-port switch
  • MADI interface: 1 x optical 64-in/64-out connector 1 x BNC 64-in/64-out connector
    I/O Interfaces
See the product
tannoy-vnet2-dante-bridge_600px
  • Tannoy

Tannoy – VNET2-Dante Bridge

The VNET2-Dante Bridge is a standalone device available from Tannoy, designed to facilitate integration of VNET2 products such as QFlex with Dante digital audio networks. It is powered via PoE, or alternatively by an optional extra 12 V power supply.  The VNET2-Dante Bridge is a standalone device available from Tannoy, designed to facilitate integration of VNET2 products such as QFlex with Dante digital audio networks. It is powered via PoE, or alternatively by an optional extra 12 V power supply.  Dante is an audio networking technology developed by Audinate. It allows many channels of uncompressed digital audio, and control data to be conveyed down a standard Ethernet network. The VNET2 Dante Bridge allows VNET2 devices to be seamlessly integrated into Dante systems with the minimum of fuss. Analog outputs also allow the Dante Bridge to be used with products that do not have VNET2 Interfaces, such as 1st generation VNET speakers and SC1 controllers. The three primary uses for the Dante Bridge are:
  • Dante audio to AES3 conversion with VNET control (for use with VNET2 equipped products – currently only Tannoy QFlex)
  • Conversion of Dante audio to analogue audio with VNET™ control (for use with VNET equipped products)
  • Conversion of Dante audio to analogue audio (for Dante break-out to any product with analogue inputs)
    I/O Interfaces
  • Dante Ch: 2 In
  • 24-bit
See the product