Cart
← Back to Product Catalog

SSL – Network I/O SDI

I/O Interfaces

More details

Similar Products

proco-aodimx4
  • ProCo

ProCo – AoDiMX4

The AoDiMX4 provides one RJ45 Dante output and four Neutrik black XLR analog inputs. The AoDiMX4 provides one RJ45 Dante output and four Neutrik black XLR analog inputs.
    I/O Interfaces
See the product
avn-aesio8r-iso-square
  • Sonifex

Sonifex – AVN-AESIO8R 8 AES3 Input, 8 AES3 Output Dual Dante® Interface, PoE

The AVN-AESIO8R audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. A valid input signal is confirmed by front panel AES3 lock LEDs for each input. All outputs follow the Dante system sample rate.

Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All digital AES3 inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link and Clock.

    I/O Interfaces
  • Dante Ch: 16x16
  • 16-bit, 24-bit, 32-bit
See the product
ASL-ENC-1101_1200px|ASL-ENC-1101_1200px
  • ASL

ASL – ENCHORUS ENC 1101

The ENCHORUS ENC 1101 Dante™-based audio network module offers eight AES3 outputs with individual delay (at a maximum of 2.7 seconds) and four AES3 inputs, with a four-band equalizer on each input and output. The ENC 1101 features eight built-in mixing engines and support for sample frequencies up to 192kHz. The device is easy to control and monitor through a web interface. A built-in audio matrix allows flexible routing of all inputs, outputs, and mixer signals. The ENCHORUS Dante™-based audio network was designed specifically for stage applications, offering professional connectors and superior audio quality. All ENCHORUS models include filtering and mixing capabilities and can be configured very rapidly via the integrated web interface. ENCHORUS modules are tough enough on their own but also include rubber bumpers that allow them to be easily and safely stacked on stage.
  • Throw-down Box
  • 8x AES3 outputs with delay (max. 2.7 sec.)
  • 4x AES3 inputs
  • Support of redundant Dante networks or daisy chainable
  • Four-band EQ for each input and output
  • 8x built-in mixing engines (16 inputs, stereo output)
  • Built-in audio matrix for flexible routing of all signals
  • Control via web interface
  • Sample rates: 44.1kHz/48kHz/88.2kHz/96kHz/176.4kHz/192kHz
  • Sample rate converter on AES3 inputs from 8kHz to 192kHz
  • 19” rack-mounting kit available
    I/O Interfaces
See the product