Cart
← Back to Product Catalog

Stewart Audio – FLX-E-160-2-LZ-D

Amplifiers

More details

Similar Products

mansion-PLA2DI_600px
  • Mansion

Mansion – PLA2DI

PLA2DI power amplifier provides 120W output power per channel into 4Ω and 8Ω, the amplifier can also be bridged to supply up to 240W output power into 70V or 100V. PLA2DI power amplifier provides 120W output power per channel into 4Ω and 8Ω, the amplifier can also be bridged to supply up to 240W output power into 70V or 100V. Designed in Class D amplification with the slot card of Dante interface, accepts the Audio signal from the Dante network. With the compact housing, PLA2DI provides the excellent sound and reliable quality for many install projects. Features
  • Two Channels Model – 120W RMS
  • Stereo into 4-8 Ohm loads
  • Bridged mode 240W output for 70V or 100V (Direct Drive)
  • Power down after ~15 minutes of no signal and comply with Energy Star Power consumption limits of < 0.5W in standby
  • Yellow LED (Front Panel) to indicated Standby mode is active
  • Terminal Block analog audio inputs
  • Selection for Power-Up mode
  • Switch for High Pass Filter
  • Natural cooling without Fan
  • TRIGGER could be external remoting ON/OFF
  • Short circuit protection
  • Overheating protection
    Amplifiers
See the product
iAC_240_Dante
  • AMC

AMC – iAC240

Single-channel Class-D amplifier with 240 W power output. Created for 100 V and low impedance high-quality background music systems. Containing Dante digital input card, Balanced Phoenix & Stereo RCA input and audio link output connectors. Amplifiers have an RS232 control port for integration amplifiers with third-party automation systems that allow using iAC amplifiers in large and complex audio systems that can be automated and controlled remotely. Due to the integrated signal processor, amplifier‘s volume level, tone control, mute, and standby status can be controlled with a rotary selector as well as by RS232 protocol

    Amplifiers
  • Dante Ch: 2 In
  • 48kHz
See the product
PC412-DI
  • Yamaha

PC412-DI

The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 1200W x 4 at 8Ω. Switchable for low and high impedance speaker systems.
  • 4 x 1200W at 8Ω, 4 x 1200W at 100V/70V
  • 20 x 8 powerful input matrix function
  • Sampling frequency is up to 96k
  • 16ch Dante input/output
  • Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter
  • Yamaha speaker presets
  • Remote control via ProVisionaire Touch/Control
    Amplifiers
  • Dante Ch: 16x16
  • 24-bit, 32-bit
See the product