Cart
← Back to Product Catalog

TASCAM – MM-4D/IN-X

I/O Interfaces

More details

Similar Products

focusrite-red-4pre_1200px
  • Focusrite

Focusrite – Red 4Pre

Red 4Pre combines four of Focusrite’s digitally-controlled, 'Air' enabled, Red Evolution mic preamps with dual Thunderbolt 2, Pro Tools | HD and Dante network audio connectivity. Red 4Pre combines four of Focusrite’s digitally-controlled, 'Air' enabled, Red Evolution mic preamps with dual Thunderbolt 2, Pro Tools | HD and Dante network audio connectivity. Featuring 'parallel path summing' conversion and beautiful yet robust design, the Red 4Pre interface is the perfect balance of form and function, delivering the sound quality and versatility engineers and producers expect from Focusrite. Focusrite's 58-in/64-out Red 4Pre includes Thunderbolt 2 connectivity for our lowest round-trip latency, in whatever DAW you use, enabling you to track and overdub with your preferred plug-ins and effects in real time, simplifying your workflow. Drop the Red 4Pre immediately, directly and seamlessly into any Pro Tools | HD system, or use it with existing Avid® interfaces, thanks to its twin DigiLink™ connectors. Dual Thunderbolt 2 ports allow daisy-chaining of additional components such as hard drives and displays. Plus the Red 4Pre is network audio enabled right out of the box, with dual Ethernet ports for Dante audio-over-IP networking, letting you expand your recording capability over Ethernet for up to 64 additional channels anywhere on your network, with low latency – and lower cost. Additional Red or other Dante-compatible components can be connected to the Ethernet ports of the Red 4Pre to provide additional channels irrespective of the interface used to drive the Red 4Pre. The Red Evolution mic pres in the Red 4Pre deliver a clear and honest audio performance with –129 dB EIN and 63dB of gain that allows plenty of room to bring your own sound to life with your choice of external processing. The mic pres can be controlled digitally, for adjusting/recalling settings and stereo linking via Focusrite Control software. They also include our unique ‘Air’ effect, recreating the sound of the transformer-based mic preamps in the ISA range. When ‘Air’ is enabled, the microphone impedance is set to 2.1kΩ and the frequency response curve is given a subtle mid-high boost – all in the analogue domain.
    I/O Interfaces
  • Dante Ch: 32x32
  • 24-bit
See the product
redx-poe60dd
  • Redx

Redx – PoE25DD

The PoE25DD is a 20w/8 ohm output audio power module. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one network cable. The PoE25DD is a 20w/8 ohm output audio power module. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one network cable.
  • Integration of network PoE power supply and Dante audio data transmission, simplifying cable layout and compliance with Ethernet engineering specifications;
  • Audio transmission realizes digitization, networking, and system expansion;
  • distributed digital audio systems: In large audio systems with multiple input and output devices, the audio devices are connected decentralized, routing and signal distribution through software;
  • Through the Dante interface, it is ensured that the network audio data has excellent delay indicators, and the number of audio channels carried by a single network cable terminal reaches 64 channels of input and 64 channels of output;
  • Dante Controller software allows easy network-wide Dante device discovery and full network audio routing configuration.
  • The PoE network cabling uses an Ethernet cable to carry 48V DC power. It has no restrictions on high-voltage AC wiring and better meets site safety and fire protection specifications. It can be widely used in ballrooms/function rooms, bars/restaurants, classrooms, conference rooms, chapels, theme parks, and shopping malls.
    I/O Interfaces
See the product
visionary-solutions-pna-d2_400px
  • Visionary Solutions

Visionary Solutions – PNA-D2

The PNA-D2 is a PacketAV™ Series Dante™ POE+ Two Channel Class-D Network audio amplifier. PNA-D2 is the first product in Visionary’s new PacketAV™ line of network AV endpoints. It is a (4/8 ohms) per channel network amplifier with Dante™ input that is powered via POE+, no external power supply required. It is a robust unit suitable for industrial, commercial and Pro AV installations. The unit is inherently a network device allowing it to deploy easily and enable precise control of your sound. Two independent channels can be sourced using any Dante™ audio on the network using Dante™ Controller software or other third party software. This unit is Class D to allow for efficient use of power. Distributed exclusively in the U.S. by BTX Technologies.
    I/O Interfaces
See the product