TNET-ENC-C211-DA Encoder

Product Information

The TNET-ENC-C211-DA is an innovative encoder that builds on our H101-DA by adding the convenience of a USB-C port with 100W Power Delivery (PD).

The TNET-ENC-C211-DA is equipped with a host of features that make it ideal for streaming high-resolution content over a network. It supports 4K60 1G Ethernet with subframe latency, dual LAN ports with PoE+ pass-through, a USB host port, HDMI loop output, 2×2 CH Dante Audio and audio embedding/de-embedding. The TNET-ENC-C211-DA is also easy to install and troubleshoot. It features a built-in LED display that provides information such as IP address, and it offers a variety of management and control options, including a built-in WEB UI, an open direct-control API, compatibility with Dante Control & DDM, and proprietary software for management and mass deployment.

Key Features:

· USB-C port with 100W PD

· 4K60 1G Ethernet with subframe latency

· Dual LAN ports with PoE/PoE+ pass-through

· VLAN tagging support

· USB host port

· HDMI loop output

· Audio embedding/de-embedding

· 2×2 CH Dante Audio break-in/out

· LED display for easy installation and troubleshooting

· Video Wall up to 16×16 with Mosaic configuration support

· USB 2.0 transport and routing/ Mouse Roaming in Video Wall mode

· Built-in WEB UI for configuration and setup

· Open direct-control API

· Compatible with Dante Controller & Dante Domain Manager

· Proprietary software for management and mass deployment

Specifications

Dante Ch: 4x4
Bit Depth: 24-bit
Sample Rate: 48kHz
Dante AV Enabled
AES67 Enabled

BirdDog – SDM M2

Built upon Intel^® SDM platform the BirdDog SDM Family will revolutionise the way content is distributed to even the largest installations. Simply install the SDM module inside an SDM compatible flat panel display for the most integrated and scalable NDI^® to screen solution available. No more wall boxes or patch panels, now the AV distribution is built directly into the display.

Controlled by the all in one BirdDog OS and with two BirdDog SDM modules to choose from, M1 an M2, there is a solution for every project. M1 is a full NDI Sender and Receiver based on the Intel SDM-L form factor and M2 is an NDI Receiver built on the Intel^® SDM-S module. With support for resolutions all the way up to 4Kp60, there is also a RESTful API for programming completely automated spaces.

M2 is an NDI^® Receiver module based upon the Intel^® SDM-S module. Receive NDI^® from anywhere on the network to display on screen.

AV Encoders & Decoders

See the product

ZeeVee

ZUHD60-2DA

ZUHD60-2DA is an HDMI 2.0a Dante-enabled AVoIP Decoder that is part of the ZyPerUHD60 product line. It supports IP streaming up to 4KP60 4:4:4 resolution with embedded audio and HDCP 2.3 encryption. This AVoIP decoder has dual 1G LAN ports and a 5-pin Phoenix/Euroblock connector for analog audio out. Other features include USB, IR, and RS-232 (via 3-pin Phoenix/Euroblock).

AV Encoders & Decoders

Dante AV Enabled
AES67 Enabled

See the product

Lightware

Lightware – VINX-120AP-HDMI-ENC-DNT

Lightware's VINX series devices are popular products, which can also run in point-to-point configuration and have diverse application possibilities, especially recommended for applications where scalability, flexibility and rapid deployment are in focus. The VINX-120AP-HDMI-ENC-DNT model is Dante-enabled.

They are simple to install and to operate, and have numerous built-in services most other manufacturers only provide for an extra cost. The open API of the VINX devices allow easy integration with third party systems.

Analog audio input port for audio embedding
PoE remote powering
Local HDMI output port for monitoring

AV Encoders & Decoders

See the product

TNET-ENC-C211-DA Encoder

Product Information

Specifications

Similar Products

BirdDog – SDM M2

ZUHD60-2DA

Lightware – VINX-120AP-HDMI-ENC-DNT

Stay connected to Dante

Support

Company

Dante Networking Alliance