Cart
← Back to Product Catalog

Vittoria 64 DR

I/O Interfaces

More Details

Similar Products

linea-research-dante-bridge_600px
  • Linea Research

Linea Research – Dante Bridge

The Dante Bridge allows several different classes of audio product to be seamlessly integrated into Dante systems with the minimum of fuss. Analogue outputs allow the Bridge to be used with products which have analogue inputs.  The Dante Bridge allows several different classes of audio product to be seamlessly integrated into Dante systems with the minimum of fuss. Analogue outputs allow the Bridge to be used with products which have analogue inputs. The AES3 output allows the Bridge to be used with products which have an AES3 input. The BvNet connection also allows equipment which has a BvNet control interface to be controlled over an Ethernet network, to which the PodWare application will connect directly.
  • Two analog outputs
  • AES3 output
  • Ethernet control for BvNet products
  • Rugged steel enclosure
  • Free-standing or rack-mount options
  • Power Over Ethernet (PoE)
  • Optional power by companion PSU
The control data within Dante is bidirectional, and can flow from the Dante network to a BvNet device and vice-versa. Similarly, digital audio channels within the Dante network can be routed to the BvNet socket, so that the AES3 signal is conveniently available on the BvNet network, where it can be brokenout using a special cable for use as an AES3 feed. The same audio channels are also available on analog outputs for use with any devices with analogue inputs.
    I/O Interfaces
  • Dante Ch: 2 In
  • AES67 Enabled
See the product
arrakis-systems-Simple_IP_1200px
  • Arrakis Systems

Arrakis Systems – Simple IP 8A

Simple-IP is a one rack unit AoIP box with 8 mono inputs and 8 outputs (or 4 by 4 stereo pairs). The digital version of Simple IP uses XLR AES3 connectors, that allow you to connect your digital audio equipment.  AES67 compliant, it is excellent to use with any existing Dante or AES67 network. Simple-IP is a one rack unit AoIP box with 8 mono inputs and 8 outputs (or 4 by 4 stereo pairs). Available in 2 models: analog & AES digital. The digital version of Simple IP uses XLR AES3 connectors, that allow you to connect your digital audio equipment. Uses standard off the shelf ethernet switches’ for connectivity. And uses the world standard DANTE ethernet AoIP protocol. Connect to products from more than 300 manufacturers. From mics to speakers to mixers. Using the world standard DANTE ethernet audio protocol, Arrakis has built the first cost effective ethernet audio networking solution for the average radio broadcaster and professional AV installer. It replaces the multipair cables that distribute audio around your facility with a single CAT5e ethernet cable. With its AES-67 interface, Simple-IP can even send and receive streams from other non-DANTE AoIP networks. Put one in each room and one or more in your central equipment room, then run CAT5e ethernet cable and your audio routing is done. Product demo: https://youtu.be/jAymqlc5lmo
    I/O Interfaces
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 0.32LD

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.32LD provides 32 balanced outputs. the output levels are configurable up to +24dBu. With DB-25/AES59 terminations.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

    I/O Interfaces
  • Dante Ch: 32 Out
  • 16-bit, 24-bit, 32-bit
See the product