Cart
← Back to Product Catalog

Voltera – D-1200-2M

Amplifiers

More Details

Similar Products

IX30-8
  • Dynacord

IX30:8

The IX30:8 is an 8-channel networked DSP amplifier with 3 kW total output power. Capable of driving Hi-Z or Lo-Z loads with powerTANK technology, the IX30:8 is ideal for a wide range of applications including sports venues, houses of worship, live performance spaces and hospitality. IX30:8 features eight (8) Dante inputs, eight (8) Dante outputs and eight (8) mic/line inputs that can be used as Dante break-in points. The natively operating 96 kHz DSP features a fully equipped 16 x 16 matrix mixer, EQs, dynamics, Dynacord FX and FIR-Drive capability. All 16 inputs feature pilot-tone detection, while the eight (8) Dante and eight (8) amplifier outputs allow to add pilot tones up to 30 kHz. The IX30:8 uses Dynacord‘s patented ecoRAIL technology for optimizing energy consumption. ghostPOWER via POE maintains the entire DSP, the Dante network and all mic/line inputs active, independent of the mains power. The integrated MXEstyle TaskEngine allows for system automation, scheduling, control, and integration to third party devices. IX series is fully integrated in Dynacord‘s SONICUE Sound System Software and can be used as a SONICUE control server, for direct use with the WPN1 wall panel as well as TPC-1, iOS and Windows devices.
    Amplifiers
  • Dante Ch: 8x8
  • 24-bit
See the product
stewart-audio-CVA16-1-CV-D
  • Stewart Audio

Stewart Audio – CVA16-1-CV-D

The PoE+ Amplifier Series leverages the higher power 802.3at PoE+ standard (30W port power) to power two amplifier models, the AV8-2-LZ-D (8W x 2 @ 4/8Ω) and the CVA16-1-CV-D (16W x 1 @ 70V/100V). The PoE+ Amplifier Series leverages the higher power 802.3at PoE+ standard (30W port power) to power two amplifier models, the AV8-2-LZ-D (8W x 2 @ 4/8Ω) and the CVA16-1-CV-D (16W x 1 @ 70V/100V). These compact Dante™ amplifiers are designed to be single cable solutions for smaller zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it. Simply plug the PoE+ CAT 5e/6 cable into the amplifier, wire the speakers and route audio and repeat for the next zone. The plenum rating and compact size, allows this amplifier series to be placed in the air handling space, closets, the rack or any other convenient space. The confluence of readily available and inexpensive CAT 5e/6 cabling, Dante™ networked audio and quick installation, makes this amplifier series an essential problem solver.
 
    Amplifiers
See the product
dynacord-ipx-10-4
  • Dynacord

Dynacord – IPX10:4

Dynacord's IPX10:4 is a 4 x 2500 W multi-channel installation DSP amplifier. Dynacord's IPX10:4 is a 4 x 2500 W multi-channel installation DSP amplifier.
  • 4 x 2500 W multi-channel installation DSP amplifier with digitally controlled PFC supply
  • Fully integrated DSP with high-resolution 96 kHz processing and FIR Drive
  • Dante and OCA integration via OMNEO with fallback options
  • Parallel, bridged and parallel-bridged drive modes with 70/100V and low impedance operation
  • High efficiency Eco Rail technology for lower operating costs
    Amplifiers
  • Dante Ch: 8x2
  • 48kHz-96kHz
See the product