Cart
← Back to Product Catalog

Voltera – D-1200-4M

Amplifiers

More Details

Similar Products
  • AudioControl

Bijou 5100D

Bijou Series Five-Channel Integrated Amplifier with Line-level Subwoofer Output and Dante Audio
  • HDMI eARC input transfers uncompressed high-bandwidth source audio, including Dolby Atmos, Dolby TrueHD, and DTS-HD Master Audio.
  • GaN-based high-power, hyper-performance, Class-D amplifier design
  • 65 W into 8 Ω, 130 W into 4Ω, all channels driven
  • Dante audio networking support
  • Analog and Digital Inputs; Analog Stereo Preamp and Subwoofer outputs
  • IP and IR-Controllable for seamless third-party automation compatibility
    Amplifiers
  • Dante Ch: 2x2
  • 24-bit
See the product
atlasied-dpa404_1200px
  • AtlasIED

AtlasIED – DPA404

The AtlasIED DPA404 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA404 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements. The AtlasIED DPA404 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA404 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.The DPA404 can be used right out of the box in its factory default configuration as a traditional four-channel 70.7V commercial power amplifier requiring no programming, special set-up, or network connectivity.  However, the DPA404 can be configured in four-channel mode with either 4Ω or 8Ω load impedances for two stereo zones. Many system designs require both low and high impedance amplification. The DPA404 can be configured for a 70.7V/100V paging/background system on two channels and the other two channels can be used for 4Ω/8Ω foreground stereo applications.The DPA404 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 four-channel Dante™ receiver card or a DPA-AMIX (2) mic/line and (2) AUX input card, for a total of eight inputs. All inputs can be mixed and routed to any of the four amplifier channels. All amplifier channels have an assortment of DSP tools including level controls, EQs, limiters, high & low pass filters, and delay to provide flexibility for a range of applications.The output level can be assigned to either the front panel potentiometers or to the onboard GUI. Wired remote level controls can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet, or mobile device using a web browser. All settings can be password protected.
    Amplifiers
  • Dante Ch: 4 In
See the product
ED2-1500
  • ENNE

ED2-1500

The ED Series is a new digital amplifier launched by ENNE which has built-in high-accuracy DSP built-in router , supporting UDP and network monitoring. Supporting AES3 digital audio and Dante™ digital audio transport(only for models with Dante™),supporting Dante™/Analog automatic backup supporting both low-z and high-z output.
    Amplifiers
See the product