WM-8P


More Details

Similar Products

K-array_-_KMT12_Mark_I_800pxl|K-array_-_KMT12_Mark_I_800pxl
  • K-array

K-array – KMT12 Mark I

KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.  
    Speakers
  • Dante Ch: 2x2
  • 48kHz-96kHz
worxaudio-waveseries-18S_600px|worxaudio-waveseries-18S_600px
  • WorxAudio

WorxAudio – WaveSeries 18S

The 18S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of Wave Series loudspeaker systems to 31Hz. It has a long excursion eighteen-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 18S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of Wave Series loudspeaker systems to 31Hz. It has a long excursion eighteen-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The18S is ideally suited for music reproduction and operates as a low frequency section in conjunction with other Wave Series enclosures, or as a sub bass section for any loudspeaker system requiring enhanced super low frequency (SLF) performance. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 18S can be purchased in two versions. The portable configuration has large recessed handles and a mid/high pole receptacle, while the installation version has a standard twelve point flyware system. Both are available in white, dark gray or unfinished exterior. The 18S loudspeaker is designed to satisfy a wide variety of low frequency audio applications and offers extraordinary performance and value.
    Speakers
monisms-MNS-8A11WS-1P
  • MONISMS

MONISMS – MNS-8AXXWS-1P

The MONISMS MNS-8AXXWS-1P [MONISMS Model:MNS-8A11WS-1P / MNS-8A12WS-1P / MNS-8A22WS-1P] is a digital steerable active wall-mounted wooden speakers with DANTE®-Input.
Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment including mu­seums, churches, conference-rooms and many more challenging spaces and environments.


MNS-8AXXWS-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+  used,  It can used the external 19VDC power supply.

[Model:MNS-8A11WS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-8A12WS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-8A22WS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

    Speakers