Cart
← Back to Product Catalog

Wohler – OPT-DANTE (iAM)

Dante Interface Cards

More details

Similar Products

cloudcdi
  • Cloud

Cloud – CA Series Dante Cards

Cloud's CA Series Dante Cards are available in three models - CDI-CA2, CDI-CA4, and CDI-CA8

Features:

• 2, 4, and 8-channel Dante input option cards

• Support for 44.1kHz, 48kHz, 88.2kHz and 96kHz sample rates

• Dante AES67 interoperability mode

• 1Gbps Ethernet (CDI-CA8) or 100Mbps Ethernet (CDI-CA2 / CDI-CA4)

• Dante redundancy or Ethernet switch modes (CDI-CA8)

• Dante Domain Manager (DDM) ready

    Dante Interface Cards
See the product
wohler
  • Wohler

Wohler – OPT-DANTE (12G)

Installing a Wohler unit with the Dante hardware option into an existing and functioning Dante network is virtually plug and play. The rear panel AoIP jack supports 1Gb/s and 100Mb/s Ethernet devices in Dante Audio over IP network configurations. Channel source selections are made by choosing Input Type ‘AoIP’ in the Configuration-Configure Presets page regardless of which AoIP option is installed. The iAM-series unit is set up at the Wohler factory to be used as a slave rather than a master within the Dante network. Other devices or software, such as a Dante Controller, are expected to be responsible for most device configurations and all audio routing.

    Dante Interface Cards
  • Dante Ch: 64 In
  • AES67 Enabled
See the product
Delec-IF-Dante-400px
  • DELEC

DELEC – oratis IF DANTE

The oratis IF Dante module supports up to 64 bidirectional audio channels. It is fully compatible with Dante’s unique plug and play network integration with automatic device discovery and system configuration. The Ethernet switch incorporated on DELEC’s Dante board is one of the few on the market which already supports the IEEE 802.1BA AVB standard. Each IF Dante board is equipped with four Ethernet ports.
    Dante Interface Cards
  • Dante Ch: 64x64
  • 24-bit
See the product