Cart
← Back to Product Catalog

WorkPro – DD2

I/O Interfaces

More details

Similar Products

attero-tech-unDX4I|attero-tech-unDX4I
  • Attero Tech by Q-SYS

Attero Tech by Q-SYS – unDX4I

The unDX4I is a 4 input, 2-gang wall plate interface that also includes two outputs. The unDX4I DanteTM Audio Interface is a cost effective multi‐IO wall box. The unDX4I features four balanced mic/line XLR inputs and two balanced line outputs on a Phoenix connector. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX4I is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT‐5 cable. The unDX4I’s size and IO density make it easy to put Dante connectivity wherever it’s needed ‐ near the audio source or sink ‐ thereby eliminating costly and interference prone analog wiring.
    I/O Interfaces
  • Dante Ch: 2x4
  • 24-bit
See the product
dark88mkii
  • Glensound

Glensound – DARK88 MKII

The DARK88 MKII is a versatile break in/ out box for sending/ receiving analogue audio to/ from a network utilizing the Dante audio over IP (AoIP) protocol. The DARK88 MKII is a versatile break in/ out box for sending/ receiving analogue audio to/ from a network utilizing the Dante audio over IP (AoIP) protocol. In total there are 8 channels of audio sent from the Dark88 into the network. The Dark88 has 8 off analogue electronically balanced audio inputs on Neutrik XLRs. Simultaneously there are 8 channels of audio being received from the network by the Dark88 and these incoming circuits are provided as outputs from the Dark88 in analogue.
    I/O Interfaces
  • Dante Ch: 8x8
  • 24-bit
See the product
ru-bnfp_400px|ru-bnfp_400px
  • RDL

RDL – RU-BNFP

The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with Format-A twisted-pair end-points. Model RU-BNFP operates from PoE. The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to a balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with RDL Format-A twisted-pair end-point products. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products.  The RU-BNF provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-BNF is also available in a PoE version (RU-BNFP). If PoE power and an external 24 Vdc supply are both feeding an RU-BNFP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.
    I/O Interfaces
See the product