XT-6K


More Details

Similar Products

CS704D
  • LEA Professional

CS704D-ADSP

The DANTE  CONNECTSERIES 704D-ADSP is a 4-channel amplifier with 700 watts per channel perfectly suited for high-performance applications. The CS704D-ADSP  boasts impressive features, including 96kHz linear phase FIR crossover filters with 2048 taps per channel, providing precise audio control. Additionally, it offers 4 seconds of input delay and powers on to audio in under 10 seconds when using PoE. The FIR-based speaker tunings further enhance the audio experience, ensuring unparalleled performance and reliability. Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems. The DANTE CONNECTSERIES features both analog and Dante inputs, as well as external I/O control for remote on/off and fault monitoring. It also includes compatibility with both Dante and AES67.  
    Amplifiers
201982132038
  • BARE

BARE – WD60U

The network audio power amplifier integrates a four-way digital power amplifier module. Signal processing and power amplification are solved on one motherboard, which shortens the signal path and simplifies engineering wiring.

  • Built-in 4 x 600W / 8 Ω ( 800W / 4 Ω) digital power amplifier
  • Professional PC- side control software is easy to use, Ethernet TCP / IP online management, can manage every device in the system at the same time
  • ★ DANTE network audio technology, low latency without interference, without loss of smooth and full sound quality
  • Network dual backup, multiple devices can be connected hand in hand.
  • ★ Automatic or manual network IP configuration, can be named independently for easy identification in the network
  • Automatic protection memory function in case of power failure
Output Power
Output power 8 ohms: 4x600W
Output power 4 ohms: 4x800W
Bridge mode 8 ohms: 2x 1600W
Power amplifier
Maximum efficiency of 90%, two-channel digital power amplifier
Frequency Range
20Hz-20kHz
Signal to noise ratio
100dB / 95dB
Sensitivity
26dB / 1.4V / 32dB
Crosstalk
> 90dB
Damping coefficient
> 500
Voltage gain
40dB
Total harmonic distortion
< 0.1%
Voltage conversion frequency
> 70
Conversion time
<1.5
Features
Input: 2 DANTE signal inputs
Protect power
Single channel: short circuit, DC output, low impedance; equipment: ultra low / high voltage, temperature, overload
Operation mode
Stereo, mono, bridged
interface
Input: 2 x RJ45 Output: 4 x XLR (up to)
Unit delay
<1.5ms
sampling
48k
Dimensions (WxHxD) mm
485x90x320mm
Weight (kg)8kg
    Amplifiers
NAM-203_600px|NAM-203_600px
  • DELEC

DELEC – unito NAM 203

The unito NAM 203 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The unito NAM 203 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The NAM 203 transfers the audio from the Dante audio network right to the speakers and, therefore, is the ideal monitoring tool for a multitude of applications. Designed for indoor use, the NAM 203 provides two 1GB Ethernet ports (2 x RJ45), four outputs that deliver 12W RMS at 4, 8 or 16 Ohms or, alternatively, two outputs delivering 24W RMS at 8 or 16 Ohms, plus Delay and Gain, as well as FIR and IIF filters on each channel. The unit is powered by an external power supply. 
  • Direct monitoring in Dante audio networks
  • Integrated power amplification
  • Simple configuration via web interface
    Amplifiers