Cart
← Back to Product Catalog

Yamaha – RPio222

I/O Interfaces

More details

Similar Products

DIF440|kingray-DIF440_1200px|kingray-DIF440_1200px
  • Kingray

Kingray – DIF440

DIF440 is based on the international general agreement with 4 in 4 out audio interface of Dante and based on Dante Ultimo latest chip solutions, can realize the analog audio signal access, converted to digital audio signal by Dante protocol access to any Dante audio transmission network equipment, realize high quality, long distance, the transmission properties of low latency, and to ensure that the audio signal is the most real reduction.
  • 4 analog input 4 analog output (balanced) for line / microphone level
  • Support the microphone sensitivity adjustment
  • 48V phantom power
  • 115 dB(A) dynamic range
  • 2 analog outputs
  • Support for 96k and 48k signal transmission 12V power supply
    I/O Interfaces
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 32.32LR

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.32MR provides 32x32 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

    I/O Interfaces
  • Dante Ch: 32x32
  • 16-bit, 24-bit, 32-bit
See the product
Alfatron-ALF-DAO-2XLR800x371-1
  • Alfatron Electronics

ALF-DAO-2XLR

he ALF-DAO-2XLR Dante to 2channel analog output adapter is a complete high-performance Dante device with the automation and ease-of-use features that make Dante the world’s most popular audio networking solution. The ALF-DAO-2XLR Adapter is compatible with all Dante interfaces and provides all the features you would expect from a Dante audio network. It is capable of providing high-fidelity audio reproduction, ultra-low latency, and sample-accurate synchronization across the entire network. Features:
  • Seamlessly integrate Dante systems into traditional analog systems.
  • There is no need to discard familiar mixing consoles, wireless microphones, and other analog signal sources, or analog amplifiers. All you need is to incorporate them into your audio network via Dante I/O.
  • With 2 channels of analog output on XLR
  • POE(802.3af)
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
See the product