Cart
← Back to Product Catalog

Yamaha – RSio64-D

I/O Interfaces

More details

Similar Products
  • Profitt

Profitt – PBX-AE-101-X

The Profitt PBX-AE-101-x provides for analog or AES3 digital audio transmission over local network (AoIP) via Dante or AES67 protocol.  The Profitt PBX-AE-101-x provides for analog or AES3 digital audio transmission over local network (AoIP) via Dante or AES67 protocol. 100/1000Mbps Ethernet supported. Transmission of four audio channels and one channel of InterCom. Configurable as a 4-channel transmitter (receiver) or a two-channel bidirectional link. Depending on a model (index “A”) supports 4 analog audio channels or (index “E”) 2 channels of AES3 audio. Auxiliary Ethernet port provides redundant network connectivity or cascading of devices. Capability of Ethernet SFP provides an optical connectivity (SFP module sold separately). Configuration and monitoring is made with a dedicated Dante Controller software package over Ethernet
    I/O Interfaces
See the product
Dante官网logo
  • BARE

BARE – DP-8

Features： 1. The frameless design of the mesh cover makes it fit the wall and ceiling better; 2. The network cable realizes signal transmission and power supply; 3. Automatically assign IP address through router DHCP; 4. Each receiving channel can be controlled independently, and can be applied to any location in the local area network 5. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 6. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 8. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
  • 24-bit
  • 44.1kHz-48kHz
See the product
ru-fn_400px
  • RDL

RDL – RU-FN

The RU-FN is a high quality Format-A to Dante network interface compatible with RDL Format-A twisted pair audio products. The RU-FN converts three Format-A audio pairs to Dante networked digital audio channels. The unit also converts a balanced or unbalanced line-level AUX input to Dante. Model RU-FNP operates from PoE. The RU-FN is a high quality Format-A to Dante network interface compatible with RDL Format-A twisted pair audio products. The RU-FN converts three Format-A audio pairs to Dante networked digital audio channels. The unit also converts a fourth input, balanced or unbalanced line-level AUX, to Dante. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products.  The RU-FN provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-FN is also available in a PoE version (RU-FNP). If PoE power and an external 24 Vdc supply are both feeding an RU-FNP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product