Yamaha – VXL1-16P


More details

Similar Products

K-array_-_KMT12_Mark_I_800pxl|K-array_-_KMT12_Mark_I_800pxl
  • K-array

K-array – KMT12 Mark I

KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.  
    Speakers
  • Dante Ch: 2x2
  • 48kHz-96kHz
MLB118a
  • DMIX

DMIX – MLB 118a

Speaker model: MLB 118a

Speaker type: 18 "low frequency active line array speaker

Unit configuration: LF: 18" woofer 4"(100mm)Voice coil

Frequency response: 35Hz-200Hz (-10dB)

Rated power: LF: 600W

Sensitivity: LF: 98dB

Sound pressure level: 133dB (peak)

Radiation Angle: DSP control

Crossover point: 740×515×720 (W×H×D)

Size (mm) : 2000W (Class D) 4Ω

Module amplifier power: 2 balanced XLR inputs or 2 AES inputs or a set of Dante signal inputs and outputs

Module input link: RS485、USB or Dante

    Speakers
CNET8D
  • DMIX

DMIX – CNET8D

Technical parameters:

Speaker model: CNET8D

Speaker type: 8" Active two-division loudspeaker

Unit configuration: 8"(200mm) woofer 1"(25mm) Treble driver

Frequency response: 80Hz-19kHz

Rated power: 100W

Sound pressure level: 115dB

Sensitivity: 92dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×80°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input,1×XLR Balanced output

Active power amplifier module: 100W

Volume knob control: Yes

Central control interface: RS232

Size (mm) : 250×391×235 (W×H×D)

    Speakers