Cart
← Back to Product Catalog

Yamaha – XMV8140-D

Amplifiers

More details

Similar Products
  • Biamp

Voltera – D-2400-8

8-channel amplified loudspeaker controller, 2400 watts total power. Key Features
  • Audio DSP and amplified loudspeaker controller plus some headroom for Tesira custom processing and hosting of expanders
  • 4 class D channels sharing 1200 watts
  • Power sharing provides up to 50% of total power or 1200 W through any single channel
  • High peak voltage output capability: 237 Vpk
  • Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
  • Each model supports AVB, Dante, and AES67
  • Accurate raised cosine EQ below 160 Hz
  • Group-controlled raised cosine EQ making it attractive for tuning large systems
  • Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
  • Processor can be sustained through POE – no main power required and no reboots
  • Support for failover-to-analog from networked audio input operation
  • 5-year warranty
  • Compliant with the US Trade Agreement Act (TAA)
  • Biamp Workplace Ready
    Amplifiers
  • Dante Ch: 32x32
  • 48kHz-96kHz
See the product
500553_AFR_Small_v2-600x402
  • Muxlab

Muxlab – Dante 2-Channel Power Amplifier 240W

The Dante 2-Channel Power Amplifier 240W (Model 500553) features a Dante slot card that accepts the digital signal from the Dante network and converts it to an analog audio signal using it as the input source of the amplifier. Simply use “Dante Controller” to route a signal from source devices that are on the same Dante network. Its space-saving 1/2 rack design allows for quick installation and provides flexibility to mix and match with other 1/2 rack products to save valuable equipment rack space. This powerful class D amplifier is combined with features such as 12V trigger control, audio-sensing, volume gain adjustment, short circuit protection and overheating protection.
    Amplifiers
  • Dante Ch: 2 In
  • 16-bit, 24-bit, 32-bit
See the product
CS3004
  • LEA Professional

CS3004D

Introducing the CONNECTSERIES 3004, a 4-channel amplifier with 3000 watts per channel. This addition to the CONNECTSERIES  family is available in NETWORK CONNECT and DANTE CONNECT versions, including both Dante and AES 67 connectivity options. As part of the Network CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for large-scale installations. The 3004/3004D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable. Then there’s the Cloud…the Network and Dante CONNECTSERIES are the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud
    Amplifiers
See the product