Allen & Heath - SQ Dante

Allen & Heath – SQ Dante

Product Information

SQ Dante provides any SQ mixer with a full 64×64 channel, 96kHz or 48kHz interface to a Dante network. An SQ fitted with the Dante option card can seamlessly connect to amplifiers, preamps and other devices on the Dante network, making full use of SQ’s high resolution 96kHz audio.The SQ Dante card can be switched between 96kHz or 48kHz to accommodate Dante networks running at either sample rate. In addition to facilitating system integration, the card also enables digital splits and affordable multitrack recording direct to a computer.

Specifications

Dante Ch: 64x64
Bit Depth: 24-bit
Sample Rate: 48kHz, 96kHz
AES67 Enabled

Electro-Voice – NetMax Dante Audio Module DM-1

32 in, 32 out Dante interface card for EV Netmax 32 in, 32 out Dante interface card for EV Netmax Features:

Connect NetMax to a Dante digital audio network
Transmit up to 32 ins and 32 outs at 48 or 96 kHz sample rate and 16-, 20-, or 24-bit word-length
Low latency (typically below 1 ms)
Two Gigabit Ethernet interfaces for system redundancy
Status LEDs for each interface
Dante Zen device-discovery
Compatible with Dante Virtual Soundcard

Dante Interface Cards

Dante Ch: 32x32
16-bit, 24-bit

See the product

Kingray

Kingray – MDT44-E1

▲ 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲ I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

Dante Interface Cards

See the product

1073opx-digital-option-card-136-p[ekm]1000x691[ekm]

AMS Neve

AMS Neve – 1073OPX Digital Option Card

When Legend meets future. The 1073OPX Optional Digital card provides a USB and Dante AD/DA interface with eight channels of analogue to digital conversion for each 1073OPX preamp output and two channels of Digital to Analogue conversion for the digital monitor return signal path. The USB connection allows the 1073OPX to be connected to a DAW enabled PC/MAC computer to be used as a Primary/Core audio interface. In addition to the USB connection, Primary and Secondary Dante connections allow for the 1073OPX to be connected to any Dante Audio-Over-Ip network as a Dante enabled preamp. The Digital card can be retrofitted easily to any existing 1073OPX unit.

Dante Interface Cards

Dante Ch: 2x8
24-bit

See the product

Allen & Heath – SQ Dante

Product Information

Specifications

Similar Products

Electro-Voice – NetMax Dante Audio Module DM-1

Kingray – MDT44-E1

AMS Neve – 1073OPX Digital Option Card

Stay connected to Dante

Support

Company

Dante Networking Alliance