Cart
← Back to Product Catalog

Behringer – WING-DANTE

Dante Interface Cards

More details

Similar Products

Midas_M32_400x203|Midas_M32_400x203
  • Midas

Midas – M32

The M32 is a live performance and studio recording digital console with up to 40 simultaneous input channels. It includes 32 award-winning MIDAS microphone preamplifiers, 25 time-aligned and phase-coherent mix buses and Dante network connectivity when including the DN32-DANTE card. By installing the DN32-DANTE card in place of the DN32-USB card, your M32 will interface with Dante networks using virtually any 100Mbit/s or Gigabit Network infrastructure with DSCP-based QoS – providing dependable multi-channel audio that coexist with other IP-based data traffic on the same network. The DN32-DANTE card utilizes 24-bit signal transmission with sample-accurate synchronization and low latency, ensuring the highest audio integrity. And a secondary input allows you to set up a seamless, redundant network. Full remote control of the M32 is possible using the integrated Ethernet switch. When the DN32-DANTE card is connected to a computer, Audinate’s Dante Controller application gives you full control over configuration and signal routing among your Dante-enabled devices.
    Dante Interface Cards
  • Dante Ch: 32x32
  • 24-bit
See the product
isa-adn8-front
  • Focusrite

Focusrite – ISA ADN8

ISA ADN8 is an optional eight-channel A-D card that provides high-quality analogue-to-digital conversion for the Focusrite ISA 428 MkII and ISA 828 MkII microphone preamps. Featuring Dante, AES3 and ADAT connectivity, the card operates at sample rates up to 24-bit / 192kHz.

The card offers primary and secondary RJ45 Dante output ports, an AES59 DB25 connector for AES3 output, and a pair of TOSLINK connectors for ADAT output. Word Clock I/O on BNC connectors allows synchronisation to multiple digital sources. This also includes syncing the Dante network to house clock, or for syncing external equipment to the Dante network.

Dante outputs on the ISA ADN8 provide ISA 428 MkII and ISA 828 MkII with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller.

    Dante Interface Cards
  • Dante Ch: 8 Out
  • 24-bit
See the product
Electrovoice_-_NetMax_Dante_Audio_Module_DM-1_1200pxl|Electrovoice_-_NetMax_Dante_Audio_Module_DM-1_1200pxl
  • Electro Voice

Electro-Voice – NetMax Dante Audio Module DM-1

32 in, 32 out Dante interface card for EV Netmax 32 in, 32 out Dante interface card for EV Netmax Features:
  • Connect NetMax to a Dante digital audio network
  • Transmit up to 32 ins and 32 outs at 48 or 96 kHz sample rate and 16-, 20-, or 24-bit word-length
  • Low latency (typically below 1 ms)
  • Two Gigabit Ethernet interfaces for system redundancy
  • Status LEDs for each interface
  • Dante Zen device-discovery
  • Compatible with Dante Virtual Soundcard
    Dante Interface Cards
  • Dante Ch: 32x32
  • 16-bit, 24-bit
See the product