Cart
← Back to Product Catalog

Calrec – BI6192

Dante Interface Cards

More details

Similar Products

Audac_-_ANI22_0
  • AUDAC

Audac – ANI44

The ANI44 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with four input and four output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more. The ANI44 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with four input and four output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more. A truly plug & play solution is created when linking multiple DANTE enabled devices with each other on a standard IP network. It offers self-configuring solutions by using DHCP configuration, while the connection can be made to any existinig 100 Mbit or 1 Gbit network infrastructure. Bidirectional signal transmissions with a sampling frequency of 48 kHz and a bit depth of 24 bit are simultaneously possible on all in and output channels, while guaranteeing an incredibly low latency with a maximum up to 5 ms. (depending of the network occupation). The network connection is implemented using an Ethercon compatible connector, allowing connection using standard RJ45 or ruggedized Ethercon connections in professional applications. The ANI44 comes delivered as an installation kit,including all required accessories for integration into the amplifier chassis. Installation shall be performed by qualified technicians.
    Dante Interface Cards
  • Dante Ch: 4x4
  • 24-bit
See the product
Electrovoice_-_NetMax_Dante_Audio_Module_DM-1_1200pxl|Electrovoice_-_NetMax_Dante_Audio_Module_DM-1_1200pxl
  • Electro Voice

Electro-Voice – NetMax Dante Audio Module DM-1

32 in, 32 out Dante interface card for EV Netmax 32 in, 32 out Dante interface card for EV Netmax Features:
  • Connect NetMax to a Dante digital audio network
  • Transmit up to 32 ins and 32 outs at 48 or 96 kHz sample rate and 16-, 20-, or 24-bit word-length
  • Low latency (typically below 1 ms)
  • Two Gigabit Ethernet interfaces for system redundancy
  • Status LEDs for each interface
  • Dante Zen device-discovery
  • Compatible with Dante Virtual Soundcard
    Dante Interface Cards
  • Dante Ch: 32x32
  • 16-bit, 24-bit
See the product
IMG_2664
  • Kingray

Kingray – MDT44-E1

▲ 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲   I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

    Dante Interface Cards
See the product