Cart
← Back to Product Catalog

DiGiCo – A168D STAGE

I/O Interfaces

More details

Similar Products

dd-rn40
  • RDL

RDL – DD-RN40

The DD-RN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. The module is configured and adjusted using RDL CONSOLE or other network control software. The DD-RN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-RN40 is PoE powered, and is available in multiple finishes with optional customized graphics.

Mic/Line to network section

The four XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are software-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. P48 phantom voltage may be software enabled when an input is set for mic level.

Network to line section

Two Dante audio channels are converted to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a software controlled attenuator adjustable in 1 dB steps to a maximum attenuation of 62 dB then OFF. The outputs are connected through a detachable terminal block.

The outputs are intended for connection to RDL AMS connectors mounted in Decora®-style plates that match the DD-RN40. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-RN40 in a triple gang box or may be mounted remotely in a single box.

Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.

The DD-RN40 is a professional grade product with RDL mic preamplifiers for studio quality fidelity and low noise performance, coupled through XLR jacks housed in a steel chassis with dual powder-coated or stainless steel Decora front plates.

The DD-RN40’s superior performance specifications make it ideally suited to installations requiring network control and exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.

    I/O Interfaces
  • Dante Ch: 2x4
  • 24-bit
See the product
musicrown-df4-4mn
  • Musicrown

Musicrown – DF4.4MN

Musicrown's DF4.4MN is a network digital matrix processor. Musicrown's DF4.4MN is a network digital matrix processor.
  • 32 bit DSP process, 48kHZ sampling rate, 24-bit AD/DA convert.
  • 8X8 core matrix, which includes 4 local input channels, 4 local output channels, 4 Dante input channels and 4 Dante output channels.
  • Dante digital audio 4IN/4OUT Network interface (2xRJ-45), using 24-bit precision, the internal can distribute with the DSP signal’s 4IN/4OUT route.
  • Dante's advanced Network synchronization technology, can provide low latency, low shaking rate and high sampling precision. Can be used in high performance digital media Network audio and video facilities, radio broadcast and sound recording system. It has all advantages of the CobraNet and EtherSound, such as no compress digital audio signal, ensures the good sound quality effect.
  • Each analog input channels with +48V phantom power, MIC/LINE input gain switchable, MIC input sensitivity adjustable.
  • Input including low cut, independent feedback inhibition, 5 band PEQ, noise gate, gain, mute, phase, linkage adjustment and volume adjustment.
  • Output including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay, linkage adjustment and volume adjustment.
  • All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
  • All inputs/outputs can do Matrix, and all the input and output channel name can be changed.
  • All the input and output with independent phase curve adjust function, PEQ style choose ALLPASS1 can realize 180º curve adjust, ALLPASS2 can realize 360º curve adjust.
  • All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
  • Noise gate’s threshold, time can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
  • Maximal delay time 680mS for all output channels.
  • Pre setting can copy for every single channel, every channel can do link adjust.
  • Every input and output channel frequency response curve situation can be found when you are in any input and output.
  • Intergrated single generator (pink, white noise and 20-20K sine wave, amplitude adjustable).
  • Front panel has level indicator for input/output, USB port, power supply, network indicator light. Plug-in Dante digital audio port at rear panel, can search for all ID in same segment net when connect PC software
  • One-button connection easy for user’s operations.
  • 21 user presets, device and each preset can be save and recall. Password protection function for high level applications.
  • Unique assembly aluminum side plate card slot design, can assemble two identical machines into one standard 1U machine. Also can assemble its side ear to the standard cabinet.
    I/O Interfaces
See the product