Cart
← Back to Product Catalog

DSPPA – DT2200

I/O Interfaces

More details

Similar Products

mansionDIC2R43A
  • Mansion

Mansion – DIC2R43A

DIC2R43A is a high quality Dante interface box for converting three Dante channels to CSP products, and an additional analogue output. An analogue input channel and  three CSP product input channels to Dante network. Features: * Convert CSP A, B and C signals to Dante network * Convert 3-channel Dante signals to A, B and C channels of CSP. * Signal level and limit LED indicator for each input channel on the front panel * Switchable Line / Microphone / 48V phantom power for auxiliary input * Provide high quality preamplifier for microphone *Adjustable gain for each input channel on the front panel is -20 dB to + 20 dB * LED indicator for the signal level of each output channel on the front panel. * Power over Ethernet (PoE) or 24VDC power supply * LED indicators show power and network status. * High resolution 24-bit of DAC and ADC *Dimension: 146mm x 41.6mm x 96.9mm (WHD)
    I/O Interfaces
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 0.16L

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.16L provides 16 balanced outputs with terminal block termination.

The output levels are configurable up to +24dBu. With terminal block termination.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

    I/O Interfaces
  • Dante Ch: 16 In
  • 24-bit
See the product
a168dstage
  • DiGiCo

DiGiCo – A168D Stage

The A168D Stage is a portable 16 input 8 output I/O Expander, again using the Dante network protocol to provide additional I/O anywhere on a network. It comes with 16 mic preamps on XLR inputs with Phantom Power status LEDs and 8 XLR line outputs with direct preamp control from the 4REA4 controller software. It runs at 48k and 96k and is AES67 compatible. Primary and secondary ports again come with locking EtherCON connectors and can run in redundant or switched mode.

    I/O Interfaces
  • Dante Ch: 16x8
  • 24-bit
See the product