Equipson - DD4

Equipson – DD4

Product Information

DD4 devices are gateways used to convert DANTE (Digital Audio Network Through Ethernet – developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

Jünger – EASY LOUDNESS

With dual stereo processing channels, integrated 3G SDI and optional logging features EASY LOUDNESS SDI is the ideal solution for automatic and intelligent real-time loudness management. Jünger Audio’s integrated Level Magic process ensures maximum audio quality and compliance with all worldwide loudness standards. With dual stereo processing channels, integrated 3G SDI and optional logging features EASY LOUDNESS SDI is the ideal solution for automatic and intelligent real-time loudness management. Jünger Audio’s integrated Level Magic process ensures maximum audio quality and compliance with all worldwide loudness standards. Ideally suited for stereo broadcast and production, the EASY LOUDNESS SDI audio processor is designed to ensure that audio levels and loudness are automatically kept under control – from program to program and day to day. Featuring comprehensive Level Magic loudness control, fail over switching and true peak limiting for two independent stereo programs, sourced from SDI or AES.

I/O Interfaces

Dante Ch: 8x8
24-bit

See the product

Sommer Cable

Sommer Cable – SPY-EDA-4OX

Sommer Cable's SPY-EDA-4OX is a 4 Channel Dante adapter with 2x XLR 5-pole outputs

I/O Interfaces

See the product

Alfatron Electronics

ALF-DAI-2XLR

The ALF-DAI-2XLR 2 channel analog to Dante input adapter is a complete high-performance Dante device with the automation and ease-of-use features that make Dante the world’s most popular audio networking solution. The ALF-DAI-2XLR Adapter is compatible with all Dante interfaces and provides all the features you would expect from a Dante audio network. It is capable of providing high-fidelity audio reproduction, ultra-low latency, and sample-accurate synchronization across the entire network. Features:

Seamlessly integrate Dante systems into traditional analog systems.
There is no need to discard familiar mixing consoles, wireless microphones, and other analog signal sources, or analog amplifiers. All you need is to incorporate them into your audio network via Dante I/O.
With 2 channels of analog input on XLR
POE(802.3af)

I/O Interfaces

Dante Ch: 2 Out
24-bit

See the product

Equipson – DD4

Product Information

Similar Products

Jünger – EASY LOUDNESS

Sommer Cable – SPY-EDA-4OX

ALF-DAI-2XLR

Stay connected to Dante

Support

Company

Dante Networking Alliance