Cart
← Back to Product Catalog

Fohhn – ABX-5

I/O Interfaces

More details

Similar Products

audioscience-16-16m_1200px|audioscience-16-16m_1200px
  • AudioScience

AudioScience – Iyo 16.16M

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 16.16M provides 16x16 balanced analog audio inputs and outputs. The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 16.16M provides 16x16 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status. The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller. Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack. All units can also be operated in AES67 interoperability mode.
    I/O Interfaces
  • Dante Ch: 16x16
  • 24-bit
See the product
equipson-dd4
  • Equipson

Equipson – DD4

DD4 devices are gateways used to convert DANTE (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

    I/O Interfaces
See the product
fp-nml2p
  • RDL

RDL – FP-NML2P

The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio amplifiers or equipment to a Dante network. Model FP-NML2P operates from PoE. The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio power amplifiers, or other audio equipment, to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom. The FP-NML2 operates from 24 Vdc and is available in a PoE version: FP-NML2P. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product