Cart
← Back to Product Catalog

KDS-17 EN

AV Encoders & Decoders

More details

Similar Products

ZW B404
  • ZenWin

ZW-B404

Features
  • Microphone/line input: 4 x balanced audio inputs.
  • Line output: 4x balanced audio output.
  • Dante：1 x Dante ® Ethernet interface connector, supporting POE power supply; 1 x Dante ® Ethernet interface connector; Two interfaces implement data exchange function.
  • DC 12V: A DC connector used for connecting DC 12V1A power adapters.
  • Input interface: 4-channel microphone/line input,
  • 3-pin green wiring terminal Output interface: 4-channel line output,
  • 3-pin green terminal block Gain: Input: 0~+48dB, 6dB per step;
  • Output: -60~0dB,
  • 1dB per step Maximum level: Input:+18dBu @ 0dB input gain;
  • Output:+18dBu @ 0dB output gain
  • Input impedance:>1.8k Ω Effective
  • Input Noise (EIN): -119dB @ 48dB gain
  • Effective output noise:<-79dBu @ 0dB gain
  • Harmonic distortion:<0.05%
  • Sampling rate: 44.1kHz or 48kHz
    AV Encoders & Decoders
  • Dante Ch: 4x4
  • 24-bit
See the product
  • TiGHT AV

TNET-ENC-C211-DA Encoder

The TNET-ENC-C211-DA is an innovative encoder that builds on our H101-DA by adding the convenience of a USB-C port with 100W Power Delivery (PD). The TNET-ENC-C211-DA is equipped with a host of features that make it ideal for streaming high-resolution content over a network. It supports 4K60 1G Ethernet with subframe latency, dual LAN ports with PoE+ pass-through, a USB host port, HDMI loop output, 2x2 CH Dante Audio and audio embedding/de-embedding. The TNET-ENC-C211-DA is also easy to install and troubleshoot. It features a built-in LED display that provides information such as IP address, and it offers a variety of management and control options, including a built-in WEB UI, an open direct-control API, compatibility with Dante Control & DDM, and proprietary software for management and mass deployment. Key Features: · USB-C port with 100W PD · 4K60 1G Ethernet with subframe latency · Dual LAN ports with PoE/PoE+ pass-through · VLAN tagging support · USB host port · HDMI loop output · Audio embedding/de-embedding · 2x2 CH Dante Audio break-in/out · LED display for easy installation and troubleshooting · Video Wall up to 16x16 with Mosaic configuration support · USB 2.0 transport and routing/ Mouse Roaming in Video Wall mode · Built-in WEB UI for configuration and setup · Open direct-control API · Compatible with Dante Controller & Dante Domain Manager · Proprietary software for management and mass deployment
    AV Encoders & Decoders
  • Dante Ch: 4x4
  • 24-bit
See the product
  • Bolin Technology

Dante AV Ultra Transceiver D20H

Bolin’s D20 Series Dante AV Ultra transceiver device can be programmed as an encoder or a decoder via firmware update. D20 Series is a single channel networked AV over IP transceiver that is fully compatible with Dante audio devices within a Dante ecosystem for HDMI sources up to 4K60Hz 4096 x 2160, with embedded audio and PTZ camera movement control via IP or IR pass-through. It provides audio and video streaming over a standard gigabit network and D20S/D20H models as decoders output baseband video, either HDMI or 12G SDI, to work in professional AV applications. D20H has HDMI 2.0 output only, which provides decoded image to output via HDMI 2.0. Integrated high-performance scaling engine provides scalable encoded source for a wide array of UHD, HD resolutions to match the different capabilities and requirements of sources, displays, codecs, and other equipment.
    AV Encoders & Decoders
  • Dante Ch: 8x8
  • 16-bit, 24-bit, 32-bit
See the product