Cart
← Back to Product Catalog

Klotz – G2 Audio Engine

I/O Interfaces

More details

Similar Products

equipson-dd4
  • Equipson

Equipson – DD4

DD4 devices are gateways used to convert DANTE (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

    I/O Interfaces
See the product
digico-orange-box_600px|digico-orange-box_600px
  • DiGiCo

DiGiCo – Orange Box

Orange Box With DiGiCo's compact 2U Orange Box, you can use DMI (DiGiCo Multichannel Interface) cards to create audio paths over whatever interface you desire. Orange Box With DiGiCo's compact 2U Orange Box, you can use DMI (DiGiCo Multichannel Interface) cards to create audio paths over whatever interface you desire. The Orange Box has 2 PSUs for redundancy, and 2 slots to accommodate any of our ten different interfaces that allow you to convert pretty much any format to another. How? We have Slot A and Slot B, let's say you have MADI on your product, but you want to go to Dante. No problem, just buy a DMI with MADI, and a DMI with Dante, connect them up via the two slots, and away you go. It's the same with Hydra 2, Optocore, Aviom, AES, Analogue, and so on. This cool little ‘anything in, anything out' box essentially gives you a choice of Multichannel user interfaces that enable you to send audio wherever you want, in whatever format you choose.
    I/O Interfaces
  • Dante Ch: 64x64
  • 48kHz-96kHz
See the product
monisms-MNS-AMPMC3011A-2P
  • MONISMS

MONISMS – MNS-AMPMC30XXA-2P

The POE DANTE/AES67 Audio Amplifier Modules MNS-AMPMC30XXA-2P, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers.
Dante Audio Amplifier module that drives small 4-8Ω speakers.
The MONISMS Dante Amplifier Modules Power 30W, 4-8Ω load.
The module's audio input is via an Ethernet audio network.
MNS-AMPMC30XXA-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.

[Model:MNS-AMPMC3011A-2P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMPMC3012A-2P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMPMC3022A-2P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

    I/O Interfaces
See the product