Cart
← Back to Product Catalog

Mandozzi Elettronica – BEA3X

I/O Interfaces

More details

Similar Products

monisms-MNS-AMPMC3011A-1P
  • MONISMS

MONISMS – MNS-AMPMC30XXA-1P Series

The POE DANTE/AES67 Audio Amplifier Modules MNS-AMPMC30XXA-1P, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers.
Dante Audio Amplifier module that drives small 4-8Ω speakers.
The MONISMS Dante Amplifier Modules Power 30W, 4-8Ω load.
The module's audio input is via an Ethernet audio network.
MNS-AMPMC30XXA-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.

[Model:MNS-AMPMC3011A-1P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMPMC3012A-1P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMPMC3022A-1P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

    I/O Interfaces
See the product
focusrite-rednet-D64R_600px
  • Focusrite

Focusrite – RedNet D64R

RedNet D64R is a 64 channel interface bridging between MADI (AES10) and Dante.  RedNet D64R is a 64 channel interface bridging between MADI (AES10) and Dante. With sample rate conversion on all input and output channels, it's simple to add MADI to connect MADI-enabled equipment with a Dante network. Both optical and coaxial connections are provided for MADI, alongside word clock connections, which allow the Dante network to synchronise with other digital audio equipment. Key features
  • Connects a MADI system and a Dante network seamlessly together.
  • Connect Dante to digital mixing consoles, interfaces and cards that use MADI; or extend a MADI system with RedNet’s versatile, superb-quality audio interfaces and connectivity – or any other Dante compatible devices. 
  • Built-in redundancy with dual locking power and etherCON network connectors. 
  • Supports both coax and optical interfaces – connect simply to any MADI equipment.
  • Slave either the Dante system or MADI streams to an external clock.
  • Supports up to 64 channels of digital audio I/O at standard sample rates (44.1/48kHz) from a MADI system, 32 channels at 96kHz and 16 at 192kHz. 
  • Sample rate conversion (SRC) on each input and output, allowing MADI and Dante systems to operate simultaneously at different sample rates. 
  • Simple 1U rack-mount module with the classic red aluminium faceplate. 
  • RedNet Control and Dante software allow remote routing and control from the audio computer system via a software control panel – no hardware patching required.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product
Vittoria 64 DR
  • Glensound

Vittoria 64 DR

The Vittoria provides a bridge between two internal and separate Dante and  Ravenna networks. These networks are completely isolated from each other with 100% network security, providing a complete network firewall. Vittoria links 64 channels from each network directly in DSP, allowing the passing of bi-directional audio but with complete isolation and security from each separate network. As each network is isolated, they can operate asynchronously and at different sample rates from each other without any problems. Each network can operate at sample rates from 44.1 kHz up to 96kHz. Features:
  • Provides a firewall between a Dante & Ravenna network interface
  • Acts as a bridge bi-directionally with Dante and AES67/Ravenna Networks
  • Acts as an interface between Dante and full SMPTE ST2110-30
  • 64 input and output channels at sample rates up to 48kHz
  • 32 input and output channels at sample rates up to 96kHz
  • The two networks can operate asynchronously or at different sample rates
  • Support for 44.1-96kHz
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product