Cart
← Back to Product Catalog

Model 544D Audio Interface

I/O Interfaces

More Details

Similar Products

rdl-ddb-bn22_1200px
  • RDL

RDL – DDB-BN22

The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DD-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level on front-panel XLR jacks. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN22 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN22’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces
See the product
lynx-aurora-n-16_1200px
  • Lynx Studio Technology

Lynx Studio Technology – Aurora (n) 16-DNT

The Aurora (n) 16-DNT provides you with pro-quality digital conversion and ultra-low-latency performance. The Aurora (n) 16-DNT provides you with pro-quality digital conversion and ultra-low-latency performance. The Aurora (n) 16-DNT gives you up to 192kHz analog to digital and digital to analog conversion with front panel control of all routing and sample rate options. Word clock and MIDI I/O connectors provide you with additional sync options, and the preinstalled LT-DNT Dante card gives you maximum networking bandwidth, with minimal latency. Aurora (n) models give you up to 32-channel recording and playback to microSD for stand-alone operation or confidence recording, as well as two audiophile-grade headphone outs, while a TFT LCD display provides immediate status information. Leveraging high-end Lynx Hilo technology and utilizing cutting-edge FPGA processors, Aurora (n) delivers even greater transparency, with significantly lower noise and distortion than previous models.
    I/O Interfaces
  • Dante Ch: 32x32
  • 24-bit
See the product
yamaha-RSio-64D_1200px|yamaha-RSio-64D_1200px
  • Yamaha

Yamaha – RSio64-D

The RSio64-D is an audio interface that can convert between Dante and Mini-YGDAI formats for up to 64 inputs and 64 outputs.  The RSio64-D is an audio interface that can convert between Dante and Mini-YGDAI formats for up to 64 inputs and 64 outputs. It provides versatile routing capability as well. Four Mini-YGDAI card slots allow cards for a wide variety of input/output formats as well as processing functions to be connected to a Dante network for live sound, broadcast, recording, post production, and other applications. The RSio64-D also supports remote setup from CL and QL series consoles. Features
  • Accepts a wide range of Mini-YGDAI input/output and processing cards
  • Seven general routing presets, including routing between Mini-YGDAI cards
  • Supports matrix patching from R Remote V3 or a CL/QL series console
  • Sample rate converters for all four Mini-YGDAI slots
  • EXT DC INPUT for redundant power supplies
  • Supports Dante redundancy (primary/secondary)
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit, 32-bit
See the product