Cart
← Back to Product Catalog

Peavey MediaMatrix – MDM32

Dante Interface Cards

More details

Similar Products

MNS-AMPMC230POE
  • MONISMS

MONISMS – MNS-AMPMC230POE

The POE DANTE/AES67 Audio Amplifier module MNS-AMPMC230POE, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers. The POE DANTE/AES67 Audio Amplifier module MNS-AMPMC230POE, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers. The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers. The MONISMS Dante Amplifier has two outputs, each with 15W of power into an 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers. The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol. MNS-AMP230POE is powered by standard POE+ and has a MAX power of 30 watts [2*15W]. If there is not  POE+  used,  It can used the external 24VDC power supply.
    Dante Interface Cards
See the product
isa-adn2-front
  • Focusrite

Focusrite – ISA ADN2

ISA ADN2 is an optional two-channel A-D card that provides high-quality analogue-to-digital conversion for the ISA One mic preamp and DI. Featuring Dante, AES3, ADAT andS/PDIF connectivity, the card operates at sample rates up to 24-bit/192kHz.

The card offers primary and secondary RJ45 Dante output ports, an XLR connector for AES3 output, a TOSLINK connector for ADAT output and RCA connector for S/PDIFoutput. Word Clock I/O on BNC connectors allows synchronisation to multiple digital sources. This also includes syncing the Dante network to house clock,or for syncing external equipment to the Dante network.

Dante outputs on the card provide ISA One with network connectivity to all Focusrite RedNet devices and Red interfaces, as well as any other Dante-enabled device from hundreds of manufacturers. Metering and settings are accessed through RedNet Control, routing is configured using Dante Controller.

    Dante Interface Cards
  • Dante Ch: 2 Out
  • 24-bit
See the product
musicrown-dms-dsp|musicrown-dms-dsp
  • Musicrown

Musicrown – DMS DSP

Musicrown's DMS DSP is a Dante interface card.  Musicrown's DMS DSP is a Dante interface card. 
  • 32 bit SHARC DSP processing, 48kHz sampling rate, 24 bit AD/DA convert.
  • 8X8 core matrix, support 4 input channels, 4 output channels, far-end support 4 channels digital input and 4 channels digital output.
  • Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 4IN/4OUT, using 24-bit precision and extremely low network latency.
  • DSP input channel including noise gate, gain, mute, phase, link adjustment.
  • DSP output channel including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link adjustment.
  • All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
  • All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
  • Noise gate's threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
  • Maximal delay time 680mS for all input/output channels.
  • Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable).
  • Hardware with 4 channel I/O monitor, supporting temperature, level, fault data sampling.
  • 30 user presets, device and each preset can be save and recall alone. Password protection function for high level applications.
  • PC software support USB, network TCP IP, Dante port on-line, real-time display of automatically searched IP address, One-button linkage easy for user’s operation more convenient and swift.
  • Module power supply mode is DC9V-12V 1A.
  • Module size is 100mmx66mmx40mm.
DMS Series:
  • DMS 2.0 - 2 analog input, 2 Dante output
  • DMS 0.2 - 2 analog output, 2 Dante input
  • DMS 2.2 - 2 analog input/output, 2 Dante input/output
  • DMS 4.0 - 4 analog input, 4 Dante output
  • DMS 0.4 - 4 analog output, 4 Dante input
  • DMS 4.4 - 4 analog input/output, 4 Dante input/output
    Dante Interface Cards
See the product